Resmed S6 Ramp settings

Does anyone know how to reset the Ramp on the Resmed S6 please.

Those on my machine seem to have been obliterated somehow and I dont want to drag it back to the hospital unless there is no other option.

Many thanks in advance

Elfina wrote:Does anyone know how to reset the Ramp on the Resmed S6 please.

Those on my machine seem to have been obliterated somehow and I dont want to drag it back to the hospital unless there is no other option.

Many thanks in advance

See if these will work.

Den


ResMed cpap S6

1. machine must be shut off
2. press START and TIMER 20 MINUTES buttons at the same time
3. switch on machine using master switch at the backside of the machine
4. using TIMER 5 MINUTES and TIMER 10 MINUTES buttons increase or decrease pressure (pressure setting is shown on display at reverse side of machine)
5. complete setting by pushing STOP button once
6. now the machine is set to the new pressure and will remember that when being shut off on switched on again

PM me your Email address and I will send you the entire two page clinician's manual.

James

You beat me to it, Wulf, but sets the treatment pressure.

To set the start pressure, you:

Turn off machine and unplug.
Hold down the 5 and 20 buttons while you turn on (plug in) the machine, holding until the buttons illuminate.
The 5 button decreases pressure and the 10 button increases pressure.
Press Stop to revert to normal operation.

James if you could send me a copy of the S6 clin manual I'll put it on my server with the other manuals.

Cheers

DSM

dsm@internetage.com

I just got this machine cause I'm laid off and the new insurance isn't covering my current machine. Thank you very much for the info !