pressure setting

chicagocard · Post by **chicagocard** » Tue Jan 10, 2006 1:09 pm

Hello, can someone please tell me how to change the pressure stting on my Remstar Pro2 C-flex machine. thanks.

Goofproof · Post by **Goofproof** » Tue Jan 10, 2006 1:47 pm

[quote="chicagocard"]Hello, can someone please tell me how to change the pressure stting on my Remstar Pro2 C-flex machine. thanks.

Guest · Post by **Guest** » Tue Jan 10, 2006 1:54 pm

Make sure your card is inserted in the cardreader.
Get into EncorePro.
Open the patient home page.
From the menu on the left side, select Create Prescription.
Then select Device Prescription.
Then under Device Type, make sure it's set to your machine with the C-Flex option.
You can hit the arrow on the right to see your choices.
Then hit NEXT and select VIA SMART CARD.

Then just follow the prompts, make your changes, keep hitting NEXT until you're done.

NightHawkeye · Post by **NightHawkeye** » Tue Jan 10, 2006 2:09 pm

Hello, can someone please tell me how to change the pressure stting on my Remstar Pro2 C-flex machine.

I have the Respironics Auto-BiPAP and can change settings after I enter the "Professional" mode by simultaneously pressing both buttons under the display while attaching the AC power cord at the back of the unit. In this mode all settings become available. This is a lot easier than programming via the SmartCard.

I don't if your machine is the same, but since it's a close cousin to mine, it might be.

pressure setting

pressure setting

Re: pressure setting