I have noticed that on my Daily mask leak report shows Maximum leak at 85 liter/min. 90% leak is at 40 liter/min. Average leak is at 35 liter/min. This looks high to me. If it was leaking that much i would surly think you would hear it. And yes my hearing is just find i "think" . I do not hear any leaks nor feel any leaks on my face or on the hose, but there is always air coming out the front of the mask where it swivels. I am using a Respironice Comfort Gel Nasal CPAP Mask with there headgear.
Thank you for your time
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition): hose
Myencore Daily Mask Leak report
Re: Myencore Daily Mask Leak report
Your mask should let out air from about there.george49 wrote:I do not hear any leaks nor feel any leaks on my face or on the hose, but there is always air coming out the front of the mask where it swivels.
And the amount of air leaking out of the mask's exhaust depends on the pressure.
Many masks have a leak/pressure graph which shows you which is the expected leak rate for the mask.
O.
_________________
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Machine: Resmed AirSense10 for Her with Climateline heated hose ; alternating masks. |
That leak rate doesn't sound all that bad to me, but check the user manual that came with the mask.
Den.
Den.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

