RESMED S7 LIGHTWEIGHT

Does anyone know how to adjust the prescribed pressure on the Resmed S7 lightweight?

For the S-7

Turn the power on.

Hold the lower arrow and left arrow down together for 5 seconds

Clinicians menue will appear.

Follow the prompts


Brenda

I tried that and it did not work. I tried most of the button in combination but no luck?? Please help????

These instructions are supposed to work for the S7 and S8 series machines.

Den



While pressing the Down arrow button, press and hold down the right hand button. Hold both buttons down together for several seconds.

That brings up the "Welcome" clinical menu.

Use the up/down button to navigate to the settings menu.

Use the left button to "Change" settings. A "Change" will not be saved until you hit the left key again under the word "Apply".

It's safe to walk through the changes just to see what they would be. When looking at a "Change" setting, the up/down arrow buttons will scroll through the possible changes of that setting. As long as you don't press the left button under the word "Apply", no change will actually happen. If you want to back out of the "Change" without changing the setting, press the righthand button under the word "Exit."

Use the right button under the word "Exit" to go backwards from whatever menu section you're in. Hit "Exit" several times to exit your way backwards completely out of the clinical menu.

Try holding the right arrow and the down arrow at the same time for at least 5 seconds. Worked for mine.

bdp522 wrote:For the S-7

Turn the power on.

Hold the lower arrow and left arrow down together for 5 seconds

Clinicians menue will appear.

Follow the prompts


Brenda

Brenda,

I think that is the process for accessing nightly data / user menu on the Resmed machines.
As explained in the other posts to access clin menu it is the right arrow + down key held down together for 3+ secs.

Cheers

DSM

Thanks DSM!

Brenda

This saved me a 2 hr drive and I'm sure a chunk of change. So they could change the cpap level which took 2minutes to change myself...once I found out how to get into the menu. I looked everywhere in the book but I guess it's a big secret. AHHH a goods night rest again! Thank you!

will the max pressure setting go higher then 7 once i am in the clinic menu i can change the ramp up pressure setting but on the gain setting app it will not change either up or down , it will also only move in the 4-7 range on the ramp changes also

I need a higher pressure then 7 , hope someone can help me

Dennis tne menace wrote:will the max pressure setting go higher then 7 once i am in the clinic menu i can change the ramp up pressure setting but on the gain setting app it will not change either up or down , it will also only move in the 4-7 range on the ramp changes also

I need a higher pressure then 7 , hope someone can help me

Of course. It'll go all the way up to 20 cm. (if a person needed that much)


Den

Hold the down arrow and the red button down till the screen changes to clinical. After the machine is on, but not running.

Can the setting be lower than 4 or does it not go lower than that.

4cm H20 is the lowest setting for any CPAP machine.

Cheers,

Bill