HELP!!! How do I change my C-Flex pressure?

My DME disabled my C-Flex for some reason and I can't breathe/sleep without it. Can anyone tell me how I can get into the settings in the machine so I can put it on myself? I would really appreciate your help.

Is it an M series machine or the older non-M model?

Better yet, what's the full name of your machine? Full name will be written on the top of the machine. Don't leave out any words, please.

Remstar Plus M Series

Unplug the unit and hold down the two Arrow buttons while pluging it in. Continue holding the arrow button for 3 to 4 sec or until it beeps twice. Press the + button to inter the clinical menu. Press the rt arrow button to navagate through the screens til yopu get to the c-flex screen should be the 5th screen. Be sure and write down the other settings so in case you change one you can go back and fix it. Press the on (center button) to exit the clinical menu. 1 is the lowest and 3 is the most pressure reduction on c-flex.

If you will sign up on the board so you can send me a PM (Private Message) with you e-mail address I would be glad to send you the whole clinical manual on your machine in PDF format.

Jerry

Jerry, I can't thank you enough! I'll PM you later for the manual. At least I'll sleep good tonight.!

Thanks again!