How to Show M Series Pro AHI Readings

Just used my M Series Pro for the first time and checked the data on the machine. It showed the compliance data, but not the AHI data. I did download it from the smart card into the software, but would like to do the quick check of AHI on the machine without downloading. How do I set this up?

Unplug your machine, plug it in while holding down the two arrow keys.

Once it boots, press the "plus" for setup and it will take you thru all the settings, including "Display AHI/Leak" or something along those lines... Some people reset this every night, but I'm okay with the 30 day and 7 day average values... I assume since you have reporting you will be as well...

Be careful what you change. In fact write down your settings as you go. This is the setup part of the machine the clinicians will use so you can change things like your pressure in there so be careful.

Menu for M Series Pro

1. Hold down the <- -> buttons while plugging in the power on the back, wait for 2 beeps, release buttons.
2. Press the + key. <- -> buttons move to next field, -/+ keys decrement/increment
3. Check the following field(s):

-Therapy Mode = CPAP

-CPAP Pressure = NN (4 - 20 cm.)

-C-Flex Setting = (options are off, 1, 2 or 3)

-Ramp Time = (options are 05 to 45 min)

-Ramp Start Pressure = cm (Min. 4cm)

-Mask Alert Feature = On (On/Off)

-Auto Off Feature = Off (On/off)

-Show AHI/Leak Feature = On (On/Off)

Press On/Off button to exit.





==========Resetting LCD Display Data====================

To reset LCD Therapy data (does NOT erase any data from SmartCard):

1. Hold down the (<-) (->) buttons while plugging in the power on the back,
wait for 2 beeps or 5 seconds, release buttons.
2. Press the (->) key and navigate to Therapy screen.
3. Press and HOLD down the (-) minus key for 5 seconds and/or until therapy data is reset to Zero.
4. Press the (->) key to scroll back to main menu, press (+) key to enter Setup or
On/Off button to exit.