Voltage Converter?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
sionghua
Posts: 49
Joined: Tue Aug 07, 2007 7:31 pm

Voltage Converter?

Post by sionghua » Tue Aug 07, 2007 11:10 pm

I am interested to by Respironics M-Series Plus with C-Flex from US web site (cpap.com). I just want to ask those of you in US does the unit comes with a voltage converter? So that I can use it no matter 220-240V/50Hz(Australia) or 110-127V/60Hz(US)? I am in Australia.


User avatar
blarg
Posts: 1407
Joined: Mon Dec 11, 2006 10:21 pm
Location: Sydney, Australia

Post by blarg » Wed Aug 08, 2007 3:10 am

It works fine on Australia mains. I've used my M Series Auto here heaps.

In fact the power cords it uses are standard "appliance cords". When I moved here from the US I just went down to Paddy's Markets and bought a few of these for 4 dollars each. Now I don't even need a plug adapter with it.

You can get these cords at Jaycar or Dick Smith as well.

I'm a programmer Jim, not a doctor!

User avatar
Craig-Tx
Posts: 232
Joined: Fri Dec 22, 2006 6:56 am
Location: Fort Worth, TX

Post by Craig-Tx » Thu Aug 09, 2007 9:18 am

The technical answer is that the unit will accept 100-240 VAC 50/60 Hz.

Which means that for > 95% of the world (if not the full 100%) if you have power coming out of the wall, the CPAP will work on it. all you have to do is adapt the plug.

This is true for both the M-Series and the M-Series humidifier. As for the other units, they are probably the same.

I personally will be testing mine in Indonesia next week (240V 50 Hz.)

-craig


_________________
Machine: DreamStation Auto CPAP Machine
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear
Humidifier: DreamStation Heated Humidifier
Additional Comments: Started PAP on 1/16/07. - Typical 90% pressure ~ 10 cm H20

User avatar
billbolton
Posts: 2264
Joined: Wed Jun 07, 2006 7:46 pm
Location: Sydney, Australia

Post by billbolton » Thu Aug 09, 2007 8:52 pm

Craig-Tx wrote:I personally will be testing mine in Indonesia next week (240V 50 Hz.)
240V 50hz is merely the most common mains voltage in Indonesia, but its by no means standardised, even across Java. Most of the cities and big towns do have 240V 50Hz power and it is mostly reliable, but after that......
if you have power coming out of the wall
Which is indeed a problem in many parts of Indonesia even, when the sockets are there.

Cheers,

Bill


_________________
MachineMask
Additional Comments: Airmini, Medistrom Pilot 24, CMS 60C Pulse Oximeter, ResScan 6

sionghua
Posts: 49
Joined: Tue Aug 07, 2007 7:31 pm

Post by sionghua » Mon Sep 10, 2007 4:22 am

Hi all,

I just got my A-Flex today and it works perfectly, Australian Custom did not cause any problem. Thanks so much to everyone for all your helps

sionghua