Sullivan V Plus

Anybody know how to reset one of these? Mine is set on 15 and I need to lower it to 12.


Thanks

JeffH

I found out how to re-set it, but the bottom hour usage display used to show pressure also. Now it is just showing hours. Anybody know how to make it show the current pressure setting?

Thanks

Jeff,

I guess you have worked out which 2 buttons to hold down to change settings ?

If yes can you post the names of them (I believe they will be the same as the Sullivan S6 models).

My guess is to keep playing with combos of 2 buttons - there is probably a couple of built-in menus activated by a 2-button pressing.

Good luck

DSM

dsm wrote:Jeff,

I guess you have worked out which 2 buttons to hold down to change settings ?

Yes, it's the start button and the 20 minute ramp button, with the cord unplugged and then plugged in. The 10 minute ramp increases the pressure, the 5 minute ramp decreases the pressure. There is a "sliding scale" led read out on the front of the machine that give pressure reading in 2cm increments, but it isn't real accurate. From what I remember, the hour meter on the bottom could also show the pressure that the machine was putting out. That's what I haven't figured out yet.

Thanks

JeffH

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): Ramp