There is now. Aircurve 11 was probably always planned but perhaps enough people are using Airbreak to add functionality. Resmed can probably phase out the 10 now. How long did it take for the 9 to phase out or was that not sold alongside the 10?
CPAP recommendation (DS1 alternative)
Re: CPAP recommendation (DS1 alternative)
-
vandownbytheriver
- Posts: 267
- Joined: Sat Feb 03, 2024 11:42 pm
Re: CPAP recommendation (DS1 alternative)
When I went in for my recent (failed!) sleep study what do I behold on the nightstand but a venerable S9 bi-level... still a work-horse. I prefer the 10 to the 11... machines should be heavier, not lighter! Also... as you mentioned Airbreak... that's not the only alternative to modding your AS10... it's a great open-source platform now... I've got one running vAuto code, for instance... it's all out there.
_________________
| Machine: AirCurve 10 Vauto USA C2C CO |
| Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
| Additional Comments: I use O2Ring, Oscar, SleepHQ, and Cover Roll Stretch mouth tape. |
-
robbob2112
- Posts: 68
- Joined: Fri Feb 02, 2024 11:02 am
Re: CPAP recommendation (DS1 alternative)
what is the name of the opensource project? I assume aIrbreak?
So here is a question - if I already have an aircurve 10 asv would it be possible for me to just download my firmware from the ASV and then just flash it to an airsense 10 and everything work? (note - I can flash firmware on a 3dprinter and play with the hardware bits pretty easy so the techical bit is doable)
What do you think?
So here is a question - if I already have an aircurve 10 asv would it be possible for me to just download my firmware from the ASV and then just flash it to an airsense 10 and everything work? (note - I can flash firmware on a 3dprinter and play with the hardware bits pretty easy so the techical bit is doable)
What do you think?