Is there some way to change the leakage icon from a smiley to a number reading like 9.4. The smiley face tells me nothing.
Also is there some way to download the information from the card for the last 30 days to my computer. I tried sleepyhead but the readings AHI, Usage were not quite the same as.
New to this form have a couple of questions.
Thanks
cpap S9 Elite
Re: cpac S9 Elite
Are you leaving the SD card in the machine over night when the machine is being used? If you are then SleepyHead's results should match up to the machine's LCD reported data.
Now if you don't have the SD card in the machine and you insert it and then remove it and take it to your computer some of the summary data you will see won't match up because some files are missing when the SD card isn't inserted in the S9 and those files are needed for the numbers to match up.
When done properly SleepyHead or the newer OSCAR (based on SleepyHead) the numbers will match up except for minor rounding up or down. The machine just goes to 1 decimal point with its calculations and the software goes to 2 decimal points.
No...there is no way to make the smiley face go away and be replaced by numbers.
OSCAR https://www.sleepfiles.com/OSCAR/
http://www.apneaboard.com/wiki/index.ph ... stallation
http://www.apneaboard.com/wiki/index.ph ... rpretation
Now if you don't have the SD card in the machine and you insert it and then remove it and take it to your computer some of the summary data you will see won't match up because some files are missing when the SD card isn't inserted in the S9 and those files are needed for the numbers to match up.
When done properly SleepyHead or the newer OSCAR (based on SleepyHead) the numbers will match up except for minor rounding up or down. The machine just goes to 1 decimal point with its calculations and the software goes to 2 decimal points.
No...there is no way to make the smiley face go away and be replaced by numbers.
OSCAR https://www.sleepfiles.com/OSCAR/
http://www.apneaboard.com/wiki/index.ph ... stallation
http://www.apneaboard.com/wiki/index.ph ... rpretation
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
- chunkyfrog
- Posts: 34544
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: cpac S9 Elite
The smileys are always on the first page. Scroll down for the actual numbers.
If they do not appear, you may need to get into the clinical menu and change essentials to "PLUS".
If you need the clinical manual, use the apneaboard link provided by Pugsy to get a free pdf.
I believe the essentials need to be on PLUS for all the real data to be written to the sd card.
If they do not appear, you may need to get into the clinical menu and change essentials to "PLUS".
If you need the clinical manual, use the apneaboard link provided by Pugsy to get a free pdf.
I believe the essentials need to be on PLUS for all the real data to be written to the sd card.
_________________
| Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Airsense 10 Autoset for Her |
Re: cpap S9 Elite
Even if there were, the number doesn't really tell you anything, you need to pull the data into Oscar (sleepyhead is dead) and look at the whole night's leak curve. you can't really, meaningfully, represent it with a single number.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

