Aircurve 10 ASV Questions

bwexler · Post by **bwexler** » Sat Dec 22, 2018 4:46 pm

I just received my slightly used Aircurve 10 ASV.
Ot seems to be working OK. It also seems much gentler than my PRS1 960 ASV.

When I try to view on screen statistics, I can't get the screen to light up.
I have tried a quick touch of the HOME key, Holding the HOME key for an extended period.
Pushing the knob. Holding the knob.
Pushing the HOME key and the knob at the same time.

What is the right solution, or is something broke?

LSAT · Post by **LSAT** » Sat Dec 22, 2018 6:09 pm

Manual says to press the dial or home key if the backlight goes off..otherwise??????

klv329 · Post by **klv329** » Sat Dec 22, 2018 7:07 pm

turning on "essentials plus" in the clinicians menu will give you summary average data up to one year under the Sleep Report "More Info"....like days used, days 4hrs+, Avg. usage, Used Hrs, Pressure, Exp. Pressure, Leak, Vt, RR, MV, TgMV, AHI, Total Al.

Best to use sleepy head software for data.

bwexler · Post by **bwexler** » Sat Dec 22, 2018 7:40 pm

I did turn on essentials plus.
I have been using SleepyHead for many years.

I was looking for a quick spot check when I don't have time to take the card to the computer and forget it there.

I did read the user and clinician manual. I was looking for the wisdom of this crowd to tell me why my fingers won't light up the display.

klv329 · Post by **klv329** » Sat Dec 22, 2018 8:22 pm

Yikes, I have never seen the display light not working on any Resmed S9 or AC10. Hopefully there is a solution here somewhere. Best of luck.

LSAT · Post by **LSAT** » Sat Dec 22, 2018 9:12 pm

Monday call http://www.Acbio.com they may give you a clue or...tell you that something is broken.

bwexler · Post by **bwexler** » Sat Dec 22, 2018 9:30 pm

LSAT wrote: ↑
Sat Dec 22, 2018 9:12 pm
Monday call http://www.Acbio.com they may give you a clue or...tell you that something is broken.

That's a great idea.
But I think I'll wait until Wednesday, since Monday is Christmas eve and they will probably be in the middle of a long weekend.

squid13 · Post by **squid13** » Sat Dec 22, 2018 10:37 pm

On mine I push the button to light it up and select sleep report and push the button again and it's bright to read your report. I always have mine set for one day.

Jas_williams · Post by **Jas_williams** » Sun Dec 23, 2018 1:53 am

Are you in a dark room ?

Maybe the light sensor is a bit dull ? The machine should light up when you stop treatment by pressing the stop button and also display the sleep report.

Make sure you only press the power/treatment button once on to for a short period of time to stop the machine otherwise it goes into power save mode (where the display is off)

bwexler · Post by **bwexler** » Tue Dec 25, 2018 10:58 am

My answer was in the manual, once I paid attention.

About the control panel
Start/Stop button
Press to start/stop therapy.
Press and hold for three seconds to enter power save
mode.

Aircurve 10 ASV Questions

Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions

Re: Aircurve 10 ASV Questions