Just received this in the mail today and looking forward to trying it out tonight. I have a few questions about charging. Seems like it should be simple, and it probably is and I'm just missing something.
The light on the side is supposed to be red when charging and green when fully charged...but when looking at it from one angle it's fully red and when looking from other angles it's fully green. There are three bars in the battery icon when it's plugged in for charging; two bars when I unplug it. So how do I know when it's fully charged? Just keep unplugging it to check until the three bars stay there? Or maybe the light eventually goes entirely green when fully charged? Also, can you over-charge it?
Thanks.
CMS 50F Pulse/Ox Question
CMS 50F Pulse/Ox Question
_________________
| Machine: DreamStation 2 Auto CPAP Advanced with Humidifier |
| Mask: AirFit™ F40 System - L/STD |
| Additional Comments: Oscar Software | APAP: 9-10 | 2nd Mask: Simplus Medium |
Last edited by WearyOne on Thu Aug 17, 2017 8:50 am, edited 3 times in total.
Re: CMS 50F Pulse/Ox Question
Mine goes entirely green when charged.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: Eson™ 2 Nasal CPAP Mask with Headgear |
All posts reflect my own opinion based on my experience and reading.
Your mileage may vary
Past performance is no guarantee of future results
Consult with your own physician as people very
Your mileage may vary
Past performance is no guarantee of future results
Consult with your own physician as people very
Re: CMS 50F Pulse/Ox Question
Well, guys, if I just had been patient a few hours longer ... . Finally, the light is completely green now. It was just weird that it was almost all green but from one angle it was all red. Maybe it does that as it gets closer to being fully charged. Who knows. Anyway, thank you both posting you experiences.
Oh, and about how many hours will it record, any idea?
Oh, and about how many hours will it record, any idea?
_________________
| Machine: DreamStation 2 Auto CPAP Advanced with Humidifier |
| Mask: AirFit™ F40 System - L/STD |
| Additional Comments: Oscar Software | APAP: 9-10 | 2nd Mask: Simplus Medium |
-
HoseCrusher
- Posts: 2744
- Joined: Tue Oct 12, 2010 6:42 pm
Re: CMS 50F Pulse/Ox Question
I seem to recall that it will only record for about 63000 heart beats...
_________________
| Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Machine is an AirSense 10 AutoSet For Her with Heated Humidifier. |
SpO2 96+% and holding...
Re: CMS 50F Pulse/Ox Question
Let's see, 70 x 60 x 7.5 x . . . yep about two nights!HoseCrusher wrote:I seem to recall that it will only record for about 63000 heart beats...
Oh, thanks for reminding me about not turning it off. I think I read that somewhere, but had forgotten. I'm always turning things off, so for a while I need to put a reminder note somewhere I'll see it first thing. Recharging every day is a good idea.xxyzx wrote:all nightWearyOne wrote:Well, guys, if I just had been patient a few hours longer ... . Finally, the light is completely green now. It was just weird that it was almost all green but from one angle it was all red. Maybe it does that as it gets closer to being fully charged. Who knows. Anyway, thank you both posting you experiences.
Oh, and about how many hours will it record, any idea?
and some more hours
but you should recharge it every day to be sure you get the next full night
dont turn it off until you uploaded the data
the manual says that deletes the old data
_________________
| Machine: DreamStation 2 Auto CPAP Advanced with Humidifier |
| Mask: AirFit™ F40 System - L/STD |
| Additional Comments: Oscar Software | APAP: 9-10 | 2nd Mask: Simplus Medium |
Re: CMS 50F Pulse/Ox Question
As you've no doubt figured out, there's two LED chips in there, close to each other, so if you look at the light from the side, you can see one or the other when they're both on. The red is supposed to drown out the green, which is on all the time when plugged in.WearyOne wrote:Just received this in the mail today and looking forward to trying it out tonight. I have a few questions about charging. Seems like it should be simple, and it probably is and I'm just missing something.
The light on the side is supposed to be red when charging and green when fully charged...but when looking at it from one angle it's fully red and when looking from other angles it's fully green.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: CMS 50F Pulse/Ox Question
palerider wrote:As you've no doubt figured out, there's two LED chips in there, close to each other, so if you look at the light from the side, you can see one or the other when they're both on. The red is supposed to drown out the green, which is on all the time when plugged in.WearyOne wrote:Just received this in the mail today and looking forward to trying it out tonight. I have a few questions about charging. Seems like it should be simple, and it probably is and I'm just missing something.
The light on the side is supposed to be red when charging and green when fully charged...but when looking at it from one angle it's fully red and when looking from other angles it's fully green.
Yep, two LED chips in there close together explains it. I'm assuming it would also be all red if it wasn't charged at all. But of course I don't plan to test that theory! Thanks, PR!
_________________
| Machine: DreamStation 2 Auto CPAP Advanced with Humidifier |
| Mask: AirFit™ F40 System - L/STD |
| Additional Comments: Oscar Software | APAP: 9-10 | 2nd Mask: Simplus Medium |
Re: CMS 50F Pulse/Ox Question
A lot of times, manufracturers cheap out and do things like skimp on the circuitry, in this case, just wiring up the green to be on all the time, and figuring the red will overpower it.WearyOne wrote:Yep, two LED chips in there close together explains it. I'm assuming it would also be all red if it wasn't charged at all. But of course I don't plan to test that theory! Thanks, PR!
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
