I have 2 bi-level cpap machines a System One 760P that is my original machine. It now has 3,862.5 hours on it.
My new to me backup bi-level cpap machine is a System One 750P with only 580.3 hours on it.
The common sense in me figures that it is most likely time or past time to take the original machine out for cleaning and service.
I figured starting tonight and for the month of September I will use the backup machine. So it is a good time to send the original machine out for service.
I live in the Cleveland/Akron Ohio area does any one know a local service shop? I would also consider sending it away for service if any one has had good luck with a
repair/service shop.
Any suggestions would be greatly appreciated. Names and numbers would be great.
I wish every one well
Machine Service
Machine Service
_________________
Machine: DreamStation BiPAP® Auto Machine |
Mask: Zzz-Mask Full Face CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: Settings are IPap 23 EPap 19 |
Last edited by Bill44133 on Mon Sep 01, 2014 11:24 am, edited 1 time in total.
Re: Machine Service
Accurate Biomed Services.
Sent my 750 there a while back for CLA and firmware install.
They did a great job.
Accurate Biomed Services
Sent my 750 there a while back for CLA and firmware install.
They did a great job.
Accurate Biomed Services
_________________
Mask: Oracle HC452 Oral CPAP Mask |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: EverFlo Q 3.0 Liters O2 PR DSX900 ASV |
Oracle 452 Lessons Learned Updated
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
Re: Machine Service
Honestly, I am not aware of any Periodic or Preventive Maintenance interval or requirement. Tho I am sure someone will be willing to take your money.Bill44133 wrote:The common sense in me figures that it is most likely time or past time to take the original machine up for cleaning and service.
I would simply start using the machine with fewer hours as the primary. Before you know it there will be a new model - then you can use your "Service Money" towards the new model.
Re: Machine Service
The old saying is.." If it aint broke...don't fix it."
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
- StuUnderPressure
- Posts: 1377
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Re: Machine Service
I am with LSAT.LSAT wrote:The old saying is.." If it aint broke...don't fix it."
Someone tinkering with your machine "could" just create problems that do not yet exist.
Now, if you desire a firmware update, that is another question.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html