Prodigal Son

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
agreeableone
Posts: 2
Joined: Fri May 29, 2009 5:08 pm

Prodigal Son

Post by agreeableone » Sat Aug 02, 2014 12:24 am

I am not new to sleep apnea and CPAPS, but need NEW advise now. Four or five years ago I quit trying to use my CPAP after too many failures. My sleep problems are multiplied by insomnia, RLS, diabetes and whatever else seems to easily disturb my sleep. There were many sleep studies that, in my opinion, proved nothing, nor solved anything. Well, lately my new internal medicine doctor said I should go and get another sleep study here in my new home town of Las Vegas, Nevada. If any place should have the very best experts on sleep problems, it is Las Vegas with so many people having to work odd shifts.

I've talked briefly to the doctor before the sleep studies and now they are complete. Before my doctors just did one night, but this doctor schedule two night. I guess the first was to just see my sleeping condition and it is funny that I felt that I slept good that night in the lab. Then, the second was, I thought, to set the specifications for the CPAP. While before, I was using a nasal system, this time I decided to try a mask that fits over my mouth and nose. The technician said it would be better, even though I had not been able to tolerate a mask before, but neither could I deal with the nasal system after awhile.

As it turned out my sleep seemed to me to be very disturbed when using the mask and CPAP. I thought the mask was leaking pressurized air out that was bothering me with noise and hitting against my face. At one point, half asleep, I know that I was trying, unsuccessfully, rip the mask off with my two hands. Another time I called the technician to have the mask fit on me better.

Hopefully, this will show up in the test results and the doctor will have some advise on what to do when I see him next week.

I would like to know if there is anything I should ask for in the way of a mask? I can't put up with the pressurized air blowing out, nor with impossibly complicated headgear that comes loose and catches my hair (what's left of it) after unsuccessfully spending half an hour trying to figure out how to get the straps right. I want to be able to sleep on my back, stomach, and either side, so the tube connection needs to accommodate that.

I am not sure what machine the lab used, but it was small, quiet with a humidifier, so I try to get one like that. Any ideas?

My insurance is good and will probably pay for what I ask for, if it is available.

Thanks.

[/b]

User avatar
Krelvin
Posts: 1977
Joined: Tue Jun 06, 2006 5:23 pm
Location: Metro Phx Area - Dry Heat!

Re: Prodigal Son

Post by Krelvin » Sat Aug 02, 2014 12:45 am

agreeableone wrote:I can't put up with the pressurized air blowing out, nor with impossibly complicated headgear that comes loose and catches my hair (what's left of it) after unsuccessfully spending half an hour trying to figure out how to get the straps right. I want to be able to sleep on my back, stomach, and either side, so the tube connection needs to accommodate that.

I am not sure what machine the lab used, but it was small, quiet with a humidifier, so I try to get one like that. Any ideas?
All FFM have air outflow. Some force the air in different directions.

The headgear, normally is adjusted in advance and you just put it back on. I rarely need to adjust it after putting it on except once in long while where I might tighten it up.

I sleep for the most part on my stomach which is unusual especially for someone using a FFM. I accomplish this by using a small abused firm pillow which I form so that when my head is on one side or the other, 1/2 my face up to the edge of mouth is on the pillow and the mask and the rest is off the pillow.

A good long hose helps a lot if you move around a lot. Normally, once I am down I rarely move much though. When I do move, it normally is shifting my head from one side to the other and sometime early in the morning I move to my right side for some time. Without being hosed, I move all night long.

The machine in the lab is most likely not something you can get. It is hooked up so that they can see and adjust the settings while you are sleeping. I use a BiPAP due to high pressures and there are some mornings it is so synced up that it is almost as if it is not on.
Current Settings PS 4.0 over 10.6-18.0 (cmH2O) - Resmed S9 VPAP Auto w/h5i Humidifier - Quattro Air FFM
TNET Sleep Resource Pages - CPAP Machine Database
Put your equip in your Signature - SleepyHead v1.0.0-beta-1
Kevin... alias Krelvin

User avatar
Goofproof
Posts: 16082
Joined: Mon Dec 05, 2005 3:16 pm
Location: Central Indiana, USA

Re: Prodigal Son

Post by Goofproof » Sat Aug 02, 2014 12:48 am

The major factor in making XPAP treatment work, is mental, you have to decide in your own head you can and will make it work correctly. it seems after 4 years you still arent there. A full face eliminates one big problem to treatment mouthbreathing, but usually leaks more, but if you use a nasal mask and mouthbreath, the needed pressure goes out your airway and doesnt work well. You must be willing to make it work, despite your heads objections. It's a desire for a better life or a shorter one filled with even more medical problems. Medical problems come to most of us, we can't change that, but they will be faster and more damaging without making cpap work.

For many it's a case of mind over matter, if you don't get your mind right, it's harder. If you think you can't do it, you will probably be correct. "CAN"T" never finished anything. Good Luck, you can do it. Jim
Use data to optimize your xPAP treatment!

"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire

User avatar
kteague
Posts: 7793
Joined: Tue May 16, 2006 8:30 pm
Location: West and Midwest

Re: Prodigal Son

Post by kteague » Sat Aug 02, 2014 7:02 am

It would have been nice to know if you are a mouth breather and indeed need a full face mask before adding that extra element of more coverage to seal, but many use a FFM quite successfully. You are in a great place to get tips and tricks to make your CPAP experience more comfortable. Post any issues that may arise and work through them until your treatment is optimized. Sounds like you never got to that point before, but hey, it's a new day. I do see you mentioned RLS. Since you also mentioned many sleep positions, I can't help but wonder if you might also have PLMD (Periodic Limb Movement Disorder). Is your sleep restless or fitful, moving about a lot - especially the legs? Have any of your previous studies mentioned limb movements? When you get the report from these studies, check and see what it says about limb movements. May not be an issue with you, but if it is, it would be easy for CPAP treatment to get the blame for sleep problems arising from a limb movement issue. Just a "heads up" just in case. If it turns out to be relevant we can talk about it more. May not be a need.

User avatar
49er
Posts: 5624
Joined: Mon Jan 16, 2012 8:18 am

Re: Prodigal Son

Post by 49er » Sat Aug 02, 2014 7:16 am

agreeableone,

I spent months wrestling with full face masks before realizing that the nasal cloth elan mask in my profile was my best option. Unfortunately, my sleep issues worsened possibly because of the delays which is a whole other post.

I guess my point is keep an open mind regarding any type of mask being able to work. I think I initially assumed I was a mouth breather because I struggled greatly with a regular nasal mask. But now I realize the pressure was too low.

49er
agreeableone wrote:I am not new to sleep apnea and CPAPS, but need NEW advise now. Four or five years ago I quit trying to use my CPAP after too many failures. My sleep problems are multiplied by insomnia, RLS, diabetes and whatever else seems to easily disturb my sleep. There were many sleep studies that, in my opinion, proved nothing, nor solved anything. Well, lately my new internal medicine doctor said I should go and get another sleep study here in my new home town of Las Vegas, Nevada. If any place should have the very best experts on sleep problems, it is Las Vegas with so many people having to work odd shifts.

I've talked briefly to the doctor before the sleep studies and now they are complete. Before my doctors just did one night, but this doctor schedule two night. I guess the first was to just see my sleeping condition and it is funny that I felt that I slept good that night in the lab. Then, the second was, I thought, to set the specifications for the CPAP. While before, I was using a nasal system, this time I decided to try a mask that fits over my mouth and nose. The technician said it would be better, even though I had not been able to tolerate a mask before, but neither could I deal with the nasal system after awhile.

As it turned out my sleep seemed to me to be very disturbed when using the mask and CPAP. I thought the mask was leaking pressurized air out that was bothering me with noise and hitting against my face. At one point, half asleep, I know that I was trying, unsuccessfully, rip the mask off with my two hands. Another time I called the technician to have the mask fit on me better.

Hopefully, this will show up in the test results and the doctor will have some advise on what to do when I see him next week.

I would like to know if there is anything I should ask for in the way of a mask? I can't put up with the pressurized air blowing out, nor with impossibly complicated headgear that comes loose and catches my hair (what's left of it) after unsuccessfully spending half an hour trying to figure out how to get the straps right. I want to be able to sleep on my back, stomach, and either side, so the tube connection needs to accommodate that.

I am not sure what machine the lab used, but it was small, quiet with a humidifier, so I try to get one like that. Any ideas?

My insurance is good and will probably pay for what I ask for, if it is available.

Thanks.

[/b]

JDS74
Posts: 3397
Joined: Sun Jan 23, 2011 2:57 pm
Location: South Carolina

Re: Prodigal Son

Post by JDS74 » Sat Aug 02, 2014 7:37 am

You might take a look at my post about the Oracle 2 mask via the link at the bottom of this post.
It would solve the leak issue, the vent blowing on you, and the complicated head gear.
That said, if there is any way to make a nasal mask work for you, breathing through your nose is better for you than through your mouth. It has to do with your nose's ability to provide proper humidity.

If you decide to try the Oracle, send me a PM and I can provide more help to make it work for you.
Oracle 452 Lessons Learned Updated
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.

User avatar
robysue
Posts: 7520
Joined: Sat Sep 18, 2010 2:30 pm
Location: Buffalo, NY
Contact:

Re: Prodigal Son

Post by robysue » Sat Aug 02, 2014 8:40 am

agreeableone,

Make sure you ask for copies of the sleep study reports (including the summary graphs) for both studies. Each report should run 3-7 pages. Having the full reports to study will help you analyze just how bad your sleep disturbed breathing is and how the tech determined the recommended pressure level. Both sleep studies may also help illuminate how bad your insomina is and whether you have other clearly identifiable sleep problems besides the OSA.
agreeableone wrote: I've talked briefly to the doctor before the sleep studies and now they are complete. Before my doctors just did one night, but this doctor schedule two night. I guess the first was to just see my sleeping condition and it is funny that I felt that I slept good that night in the lab. Then, the second was, I thought, to set the specifications for the CPAP. While before, I was using a nasal system, this time I decided to try a mask that fits over my mouth and nose. The technician said it would be better, even though I had not been able to tolerate a mask before, but neither could I deal with the nasal system after awhile.
Mask choice is highly personal, but unless you are a dedicated mouth breather there is little reason to opt for a full face mask (one that covers both the nose and mouth). FFMs tend to be harder to fit and more prone to unintentional leaks. On average they tend to have more complex headgear as well. All that said, there are some people who love FFMs and once you master putting the mask on and off, the headgear becomes easier to deal with.
As it turned out my sleep seemed to me to be very disturbed when using the mask and CPAP.
Many of us can describe the titration study (the one with the mask on) as one of the worst nights of our life.
I thought the mask was leaking pressurized air out that was bothering me with noise and hitting against my face. At one point, half asleep, I know that I was trying, unsuccessfully, rip the mask off with my two hands. Another time I called the technician to have the mask fit on me better.
...
I would like to know if there is anything I should ask for in the way of a mask? I can't put up with the pressurized air blowing out,
All masks leak through the exhaust vents. That leaking is intentional and it prevents us from rebreathing the CO2 we exhale into the mask.

Some masks have better designed exhaust vents than others. So when you are examining masks in person, you should look at the designe of the exhaust vents. The Resmed Swift FX nasal pillows mask I use has a particularly poorly designed exhaust vent: The holes are all parallel to each other and are designed to "not hit the bed partner". The result? The exhaust venting blows right onto the PAPers arms or chest or hit the bed covers and bounce back into the PAPers eyes. The exhaust vent for my hubby's F&P Eson nasal mask has a very nicely designed exhaust vent that has diffuser built in. From a distance of 3 inches or so, it's difficult to perceive any airflow at all. My point is: If you really look hard at the design of the exhaust vents for each mask AND if you try the masks on at your full pressure, you should be able to find one that has a minimally disturbing exhaust flow.


nor with impossibly complicated headgear that comes loose and catches my hair (what's left of it) after unsuccessfully spending half an hour trying to figure out how to get the straps right.
In general nasal pillows have the least complicated headgear. Some nasal masks use headgear that is almost as minimalist as nasal pillows head gear; indeed some nasal masks use headgear originally designed for nasal pillows. The headgear for most full face masks is more complex, but many of them have "quick clips" that allow you to quickly unlatch one side of the FFM and slide the mask off (and on) without having to readjust the rest of the headgear each time you put the mask on.
I want to be able to sleep on my back, stomach, and either side, so the tube connection needs to accommodate that.
It is possible to sleep in any position with almost any modern CPAP mask. It does take a bit of getting used to and it may require a few changes: For stomach and side sleeping some people find using a specially designed CPAP pillow is helpful since it provides a cutout for the mask to hang into instead of being pushed upwards by a regular pillow. Some people find they can continue to use their own favorite pillow simply by sleeping with their head near the edge of the pillow instead of in the middle of the pillow.

The hose connection on most masks is a full swivel, and hence that's not usually a problem. You may, however, also want to consider the hose connection on the machine end as well. One potential problem with the Resmed S9 is that the hose comes out of the back of the machine on a fixed hose outlet. You can turn the machine around so that back of the machine is facing your bed and that can help. Or you may want to look at the PR System One 60 Series Pro or Auto CPAP instead. The hose is attached through a swivel port on the top of humidifier on those machines.

Routing the hose overhead may also help with moving around in your sleep. A hose hanger or routing the hose over the headboard of the bed often minimizes or eliminates problems with getting tangled in the equipment when trying to move around in bed.
I am not sure what machine the lab used, but it was small, quiet with a humidifier, so I try to get one like that. Any ideas?
Most likely the lab used either a Resmed or PR titration device. Both companies make small, quiet PAP machines with heated humidifiers for home use.

For PR machines, you want one of the following two machines:
  • PR System One 60 Series Pro CPAP with C-Flex+
    PR System One 60 Series Auto CPAP with A-Flex
For Resmed machines, you want one of the following two machines:
  • Resmed S9 Elite CPAP with EPR
    Resmed S9 AutoSet CPAP with EPR
These four machines record full efficacy data including both leak and AHI data. So you will be better able to identify what the problem is if you run into the standard problems that many new PAPers face.

Best of luck.