Incorrect number of Therapy Hours listed by PR System One?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
WhatMeSnore
Posts: 25
Joined: Sat Jun 21, 2014 6:32 pm

Incorrect number of Therapy Hours listed by PR System One?

Post by WhatMeSnore » Wed Jul 16, 2014 10:46 am

My PR System One BiPAP shows the total number of Therapy Hours for the past 24 hours, but sometimes it just seems wrong. Last night I'm sure I wore the mask for a good amount of time, yet it only shows 1 hr 45 min for the past "1 Day" as it calls it. Am I wrong or is it wrong or what?

I just checked the humidifier and it's almost empty though I refilled before going to sleep. It was set on 3 most of the time but I changed it to 4 toward the end of my time wearing the mask - my tongue was dry as...toast!
Machine: Philips Respironics System One BiPAP w/ Humidifier
Mask: ResMed Mirage Quattro full-face mask

User avatar
Cowboy Casey
Posts: 154
Joined: Wed Jun 04, 2014 10:08 am

Re: Incorrect number of Therapy Hours listed by PR System One?

Post by Cowboy Casey » Wed Jul 16, 2014 1:23 pm

What does sleepyhead say? I think mine has had wacky hours also but when I look at SH it is correct... I hardly ever look at the LCD screen to get info...
PR System One REMstar 60 Series BiPAP Auto SV Advanced
https://www.cpap.com/productpage/pr-60-series-bipap-autosv-advanced.html
Pilairo Q Nasal Pillow CPAP Mask with Headgear
https://www.cpap.com/productpage/fp-pilairo-q-nasal-pillow-cpap-mask.html

User avatar
palerider
Posts: 32308
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Incorrect number of Therapy Hours listed by PR System One?

Post by palerider » Wed Jul 16, 2014 4:32 pm

I *believe* (pugsy, check me) that the PRS1 machines roll over the 'day' at what the think is 12 noon *GMT* there's no way to set the clock to local time or compensate for clock drift, that's why sleepyhead (and I think encore) has an clock offset correction setting to compensate for that.

so, basically, if you sleep 8 hours but 1.5 of them are past when the machine thinks noon is, it'll show 1.5 hours of use for that day.
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

library lady
Posts: 1116
Joined: Wed Feb 05, 2014 11:10 am
Location: Rochester, MN

Re: Incorrect number of Therapy Hours listed by PR System One?

Post by library lady » Wed Jul 16, 2014 6:02 pm

Sleepyhead sometimes incorrectly gauges amount of time slept... today I slept in, woke up and turned machine off at 9:30, but on looking at sleepyhead, I slept until 3 PM in spite of my sitting at my computer looking at the graphs at 10 AM... go figure. I've had that happen several times and I've learned that it's just a glitch... odd, but a glitch. I checked the LCD and I can see that the flow rate on graph stopped at about the time the LCD says it should have... yet some events are still being flagged... weird.
Now using AirFit F10 mask; Quattro Air is backup mask. RemZzzz mask liners with both.

User avatar
palerider
Posts: 32308
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Incorrect number of Therapy Hours listed by PR System One?

Post by palerider » Wed Jul 16, 2014 9:16 pm

library lady wrote:Sleepyhead sometimes incorrectly gauges amount of time slept..
did you ever get around to installing a more current version of SH?
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.