Waveform Data for Respironics Bipap ASV and AVAPS

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
borgready
Posts: 267
Joined: Mon Sep 27, 2010 2:41 pm
Location: VA, USA

Waveform Data for Respironics Bipap ASV and AVAPS

Post by borgready » Tue Jul 26, 2011 10:02 am

The encore pro 2.0 software will not display the waveform data for the Respironics System one Bipap Auto SV and AVAPS machines. You need the DirectView software to display the waveform data. The encore pro 2.0 will display the Respironics Bipap pro and St machines waveform data. Is this correct and why? How do you get the DirectView software(item# 1055635 or 1005297) and what is the cost? IS there generic software that will read the data and display the waveform data on all these respironics machines?
Top
User avatar
BrianinTN
Posts: 435
Joined: Fri Mar 11, 2011 3:46 pm

Re: Waveform Data for Respironics Bipap ASV and AVAPS

Post by BrianinTN » Tue Jul 26, 2011 12:29 pm

Paper_Nanny and a couple others are using Encore Pro 2.5 with their S1 ASVs and have been producing the waveforms. The S1 BiPAP S/T does not produce waveforms, no matter what software you use.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: minEPAP=4, minPS=2
Top
User avatar
Mr Bill
Posts: 532
Joined: Fri Feb 18, 2011 11:56 pm
Location: Grand Junction, CO

Re: Waveform Data for Respironics Bipap ASV and AVAPS

Post by Mr Bill » Tue Jul 26, 2011 9:55 pm

BrianinTN wrote:Paper_Nanny and a couple others are using Encore Pro 2.5 with their S1 ASVs and have been producing the waveforms. The S1 BiPAP S/T does not produce waveforms, no matter what software you use.
Sniff! We have been left behind.
EPAP min=6, EPAP max=15, PS min=3, PS max=12, Max Pressure=30, Backup Rate=8 bpm, Flex=0, Rise Time=1,
90% EPAP=7.0, Avg PS=4.0, Avg bpm 18.3, Avg Min vent 9.2 Lpm, Avg CA/OA/H/AHI = 0.1/0.1/2.1/2.3 ... updated 02/17/12
Top


Return to “CPAP and Sleep Apnea Message Board”