messed up my settings

[wilsonintexas]

I KNOW my leaks are to high. I just got 5 masks to test to try and bring it down. a while go i tried to tighten up my settings to agoid pressure swings, because I was an am getting trapped air...... I did the wrong thing.
my current settings are

Pressure Settings
Min EPAP 5.4 Max IPAP 18.8 PS 6.0-12.2 (cmH2O) I do have days with ahi below 5 some below 1. but also have uncontrolled days,
I am working on the leak, but I think I need to change settings as well. Looking for recommendations,


here is the screen print from oscr of a bas day. (ahi wise)

[wilsonintexas]

I was just thinking, over the past few months i have gone from. 225 lbs to 198. No longer obese, just overweight. Maybe i can use lower pressures, i can only hope.

Maybe without all of that fat around the belly keeping it restricted the cpcp belly is worse.

I struggled with it a few times since 2002 when i started cpap, but never this bad. Today my alarm went off at 8:30, i took antigas, and at 11:30 i am still belching.

I have looked at other posts on cpap belly, i am going to try changing some things:
- i am a belly sleeper, i can see how the machine needs higher pressure to pick up my whole (200 lb) body. I will strap a pillow to my belly so i cannot turn over.
- i read up on tongue exercises and I’m starting to do them now.
- i will continue to look for a mask to deal with leaks. It will probably be easier if i don’t sleep on my belly.

[wilsonintexas]

I tried to make some adjustments recommended. But here are the current settings Mode
Max IPAP 18.8 cmH₂O PS Min 4.0 cmH₂O PS Max 12.2 cmH₂O Max epap 6.6 Min epap 6.0 Min ipap 10.0
Pugsy asked for some zoomed in screen prints of the flow rate.

screenshot-20250714-132752.png (79.04 KiB) Viewed 6672 times

screenshot-20250714-132737.png (77.63 KiB) Viewed 6672 times

screenshot-20250714-132717.png (79.55 KiB) Viewed 6672 times

I will upload more in next post

[wilsonintexas]

more oictures

screenshot-20250714-132836.png (81.3 KiB) Viewed 6671 times

screenshot-20250714-132816.png (78.44 KiB) Viewed 6671 times

screenshot-20250714-132752.png (79.04 KiB) Viewed 6671 times

[wilsonintexas]

the last 3

screenshot-20250714-133029.png (84.21 KiB) Viewed 6670 times

screenshot-20250714-133001.png (80.12 KiB) Viewed 6670 times

screenshot-20250714-132939.png (78.6 KiB) Viewed 6670 times

[wilsonintexas]

Pugsy mentioned my mask pressure topping out from possible leaks
I rearranged the display and brought up tidal volumn as well
I agree that the maks pressure is topped out a lot, but not all from leaks

screenshot-20250714-174743.png (79.09 KiB) Viewed 6630 times

screenshot-20250714-174651.png (78.54 KiB) Viewed 6630 times

overview 20250714-175812.png (90.46 KiB) Viewed 6630 times