Velcro won't hold
Re: Velcro won't hold
I can't believe velcro goes bad after only 6 years.
Use data to optimize your xPAP treatment!
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
-
- Posts: 1
- Joined: Thu Mar 19, 2020 12:55 pm
Re: Velcro won't hold
I have had a CP for more than 10 years and have always used the Resmed nasal mask. I never had any issues over the years, replacing my mask every year or so, but the mask and head gear that I bought just 5 months ago had velcro that suddenly wouldn't catch consistently, and often let go during the night. The mask itself was still in great condition, but the head gear velcro on one side simply didn't stick. I bought a brand new mask and head gear, and that velcro failed from the first time that I used it. I suspect that they have changed manufacturers because in 10 years I never had this issue, but now in 5 months I have had the velcro issue two times in a row (the same Mask exactly as I've bought over the years, FYI).
I may try taping it in place with electrical tape, which is disappointing. I may look for a different mask brand next time.
I may try taping it in place with electrical tape, which is disappointing. I may look for a different mask brand next time.
Re: Velcro won't hold
Or... sew/glue on new Velcro.
Re: Velcro won't hold
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
- Wulfman...
- Posts: 6688
- Joined: Mon Sep 01, 2014 6:41 pm
- Location: Nearest fishing spot
Re: Velcro won't hold
Did you read the first page of this thread?dlwmarshall wrote: ↑Thu Mar 19, 2020 1:02 pmI have had a CP for more than 10 years and have always used the Resmed nasal mask. I never had any issues over the years, replacing my mask every year or so, but the mask and head gear that I bought just 5 months ago had velcro that suddenly wouldn't catch consistently, and often let go during the night. The mask itself was still in great condition, but the head gear velcro on one side simply didn't stick. I bought a brand new mask and head gear, and that velcro failed from the first time that I used it. I suspect that they have changed manufacturers because in 10 years I never had this issue, but now in 5 months I have had the velcro issue two times in a row (the same Mask exactly as I've bought over the years, FYI).
I may try taping it in place with electrical tape, which is disappointing. I may look for a different mask brand next time.
Several good suggestions were explained to fix the problem.
Which friggin' mask?
Please fill out your profile with the EXACT equipment you're using.
Den
.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: Velcro won't hold
This is one of my pet peeves. My replacement scheduled allows me to order a mask more frequently than headgear. Really it should be the opposite, as the velcro goes bad long before the mask needs to be replaced.
Re: Velcro won't hold
I run a needle through the "hooks" side a number of times to clean it up,
See you on the other side when the smoke clears...