What else can I do?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Pugsy
Posts: 65439
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: What else can I do?

Post by Pugsy » Sat Dec 22, 2018 11:53 am

palerider wrote: ↑
Fri Dec 21, 2018 10:04 pm
Cynmatthes wrote: ↑
Fri Dec 21, 2018 9:33 pm
There are 3 of us ladies in my exercise class who have sleep apnea. We were all given ff masks from the get go. One was told that is what came with the machine.
DMEs lie a lot, it seems.
Yeah ....liars and lazier than I am :lol:
I may have to RISE but I refuse to SHINE.

User avatar
babydinosnoreless
Posts: 2376
Joined: Fri Nov 02, 2018 2:53 pm

Re: What else can I do?

Post by babydinosnoreless » Sat Dec 22, 2018 9:39 pm

As I am learning. :shock:

Griffjfg
Posts: 14
Joined: Wed Dec 19, 2018 8:54 pm

Re: What else can I do?

Post by Griffjfg » Mon Dec 31, 2018 4:50 am

Pugsy wrote: ↑
Fri Dec 21, 2018 8:08 am

Post a detailed report for member input if you need to
Here's the format...we don't need or want all that SH will show you.
viewtopic/t158560/How-to-post-images-for-review.html
Bad night.
screenshot-20181231-053605.png
screenshot-20181231-053605.png (91.3 KiB) Viewed 1149 times

User avatar
Pugsy
Posts: 65439
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: What else can I do?

Post by Pugsy » Mon Dec 31, 2018 8:15 am

Bad night how?
Couldn't go to sleep for a long time?
Slept soundly but lots of events flagged?
We need some specifics. You did well after 1:30....makes me wonder what was going on the first part of the night and the bulk of the AHI is CA/central during that time frame and that makes me wonder if you had some issues falling asleep.
I may have to RISE but I refuse to SHINE.

User avatar
DreamDiver
Posts: 3082
Joined: Thu Oct 04, 2007 11:19 am

Re: What else can I do?

Post by DreamDiver » Mon Dec 31, 2018 8:30 am

It's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Image
Most members of this forum are wonderful.
However, if you are the target of bullying on this forum, please consider these excellent alternative forums:
Apnea Board
Sleep Apnea Talk Forum
Free CPAP Advice

Be well,
Chris

User avatar
JayDee
Posts: 303
Joined: Fri Jul 13, 2018 5:13 am
Location: Atlanta, Georgia, USA

Re: What else can I do?

Post by JayDee » Tue Jan 01, 2019 8:16 am

Griffjfg wrote: ↑
Fri Dec 21, 2018 8:46 pm
I guess if I couldn't find a mask that worked I would consider it (reluctantly... because I am getting desperate). But the nasal pillows stopped the leaking and the chin strap seems to be preventing me from mouth breathing.
In my experience (and opinions will likely vary) the absolute hardest part of the "xPap Life" is finding a mask that works best for your face. I'm on my 5th in about 6-months (current candidate: ResMed F30 FFM)... Like you, I've got the beard & stache. My AHI is low and my apnea from restricted airway is (I think) under control. My problem now is leaks that wake me up to fiddle with the mask. It's either air hitting my eyelids or the mask "farting" against my cheek or both (side-sleeper and back/shoulder issues have me turning occasionally).

Next thing I'm trying is a DIY mask-liner, as soon as I can get around to it. I don't expect the mask-liner to stop the leaks entirely (I won't complain if it does)-- my expectation is that it will make the leaks less noticeable so they won't wake me up as much.

Good Luck!
-JD
If you're not having a good time, *DO* something about it.

Griffjfg
Posts: 14
Joined: Wed Dec 19, 2018 8:54 pm

Re: What else can I do?

Post by Griffjfg » Tue Jan 01, 2019 10:22 pm

Pugsy wrote: ↑
Mon Dec 31, 2018 8:15 am
Bad night how?
Couldn't go to sleep for a long time?
Slept soundly but lots of events flagged?
We need some specifics. You did well after 1:30....makes me wonder what was going on the first part of the night and the bulk of the AHI is CA/central during that time frame and that makes me wonder if you had some issues falling asleep.
Had trouble going to sleep. Seemed like I woke up several times - I guess the high AHI is reflective of that. Less than 5 hours of sleep. Woke up with a slipping headache and terrible tinnitus.

I think my pillow is pushing on my mask and causing leakage. Last night i changed pillows and my AHI was under 2. I was exhausted and took an Advil PM, but I think I got about 4.5 hours of decent sleep. Took the mask off and slept about 4 more hours. I haven't slept that long since using the CPAP. I find if I wake up enough go to the RR or check the time after 4-5 hours of sleep with the mask I just can't go back to sleep with the mask.

Griffjfg
Posts: 14
Joined: Wed Dec 19, 2018 8:54 pm

Re: What else can I do?

Post by Griffjfg » Tue Jan 01, 2019 10:23 pm

DreamDiver wrote: ↑
Mon Dec 31, 2018 8:30 am
It's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Was the pressure up due to leaking though?

User avatar
Pugsy
Posts: 65439
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: What else can I do?

Post by Pugsy » Tue Jan 01, 2019 10:57 pm

You need to understand how your machine reports the leak and the reported leaks relationship to the pressure.

Respironics machines report total leak...that's the mask's intentional vent/leak rate plus any excess leak. That's the top line you see on the SleepyHead leak graph.
All mask's have expected vent/intentional leak and those numbers will always increase as the pressure increase. So when you see the pressure go up....you can expect the total leak number/line to also go up just because of the pressure increase if nothing else.

The bottom leak line on the graph...a close approximation of excess only leak. Not 100% perfectly accurate because Respironics machines don't have a static red line threshold to go by. Instead it moves as the pressure moved. It's close though.

So your pressure wasn't increasing because of leak...the pressure was increasing because of the airway trying to collapse and the machine was trying to prevent the collapse with more pressure.
The increase in leak number you see...that's just a byproduct of the pressure increasing and is normal.

If you had a lot of difficulty initially falling asleep with lots of tossing and turning and arousals for quite a while then it is very possible that a good bit of those event flags you see during the 00:00 to about 1:15 or so aren't real events...meaning the machine likely flagged some awake/semi awake breathing irregularities by mistake. These machines have no way to measure sleep status...they only measure air flow and our awake/semi awake breathing is often irregular when compared to asleep breathing and it can and will flag awake/semi awake breathing irregularities as some sort of apnea event but they aren't real. They are only real if we are asleep.
If we aren't asleep they really don't count.

I suspect you finally fell asleep around 1:30 and the machine at that point started doing it's job with the increases in the pressure to try to keep the airway open.
Prior to that the machine didn't try to do much because even though it flagged some stuff...it wasn't really related to the airway collapsing.

The best way to fix that first 90 minutes of so of ugliness....figure out how to fall asleep faster.
And...yes...I know that is much easier said than done.
Sleeping from 1:30 to 4:30 is simply not enough sleep and you are going to feel like crap with that little sleep.
Sleeping without cpap for another few hours...that's untreated apnea sleep and that's not good either....and it's a real bad habit to get into. Bad habits are easy to make and really hard to break....don't go down that slippery slope.
I may have to RISE but I refuse to SHINE.

User avatar
palerider
Posts: 32308
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: What else can I do?

Post by palerider » Tue Jan 01, 2019 11:16 pm

Griffjfg wrote: ↑
Tue Jan 01, 2019 10:23 pm
DreamDiver wrote: ↑
Mon Dec 31, 2018 8:30 am
It's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Was the pressure up due to leaking though?
No, pressure will go *down* if leaks are bad enough, never up.
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

Griffjfg
Posts: 14
Joined: Wed Dec 19, 2018 8:54 pm

Re: What else can I do?

Post by Griffjfg » Sat Jan 05, 2019 7:44 am

Pugsy wrote: ↑
Tue Jan 01, 2019 10:57 pm

The best way to fix that first 90 minutes of so of ugliness....figure out how to fall asleep faster.
Exactly what my doctor said this week. He did four things:
1) Increased starting pressure from 5 to 8. I felt like my breathing was restricted when I first put the CPAP on.
2) Gave me some REMFresh. He feels after I adjust to the machine I won't need this.
3) He also wanted to try leaving my pressure at 8 for now, so he set it at 8. He said we may need to increase eventually.
4) Gave me a different nasal mask

The good news is I have had two good nights rest since these adjustments.

Also no headaches for two days and tinnitus back to normal levels.

Thanks again for all the information, help, and encouragement.

User avatar
djams
Posts: 927
Joined: Mon Jun 18, 2018 4:37 pm
Location: DFW area

Re: What else can I do?

Post by djams » Sat Jan 05, 2019 11:20 am

palerider wrote: ↑
Tue Jan 01, 2019 11:16 pm
Griffjfg wrote: ↑
Tue Jan 01, 2019 10:23 pm
DreamDiver wrote: ↑
Mon Dec 31, 2018 8:30 am
It's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Was the pressure up due to leaking though?
No, pressure will go *down* if leaks are bad enough, never up.
Ah ha! Thanks. Explains what I was viewing as strange behavior. Trying to get the leak stopped?

User avatar
zonker
Posts: 11509
Joined: Fri Jun 19, 2015 4:36 pm

Re: What else can I do?

Post by zonker » Sat Jan 05, 2019 11:32 am

Griffjfg wrote: ↑
Sat Jan 05, 2019 7:44 am


2) Gave me some REMFresh. He feels after I adjust to the machine I won't need this.

good to now you are sleeping better. wanted to ask about the remfresh. this is the first i've heard of it and went off to google it. think i might try this myself.

i still have fragmented sleep. do you think this helped you to stay asleep?

anyone else try this?
"Age is not an accomplishment and youth is not a sin"-Robert A. Heinlein
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg

User avatar
palerider
Posts: 32308
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: What else can I do?

Post by palerider » Sat Jan 05, 2019 2:40 pm

djams wrote: ↑
Sat Jan 05, 2019 11:20 am
palerider wrote: ↑
Tue Jan 01, 2019 11:16 pm
Griffjfg wrote: ↑
Tue Jan 01, 2019 10:23 pm
DreamDiver wrote: ↑
Mon Dec 31, 2018 8:30 am
It's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Was the pressure up due to leaking though?
No, pressure will go *down* if leaks are bad enough, never up.
Ah ha! Thanks. Explains what I was viewing as strange behavior. Trying to get the leak stopped?
Here's one I came across a while back that shows it perfectly, massive leaks, and the machine dropping pressure to try and get the mask to seal:

Image

I'd seen it with Respironics, but that was the first set of data i'd gotten my hands on that showed it so clearly with a Resmed.
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
djams
Posts: 927
Joined: Mon Jun 18, 2018 4:37 pm
Location: DFW area

Re: What else can I do?

Post by djams » Sat Jan 05, 2019 2:54 pm

palerider wrote: ↑
Sat Jan 05, 2019 2:40 pm
djams wrote: ↑
Sat Jan 05, 2019 11:20 am
palerider wrote: ↑
Tue Jan 01, 2019 11:16 pm
Griffjfg wrote: ↑
Tue Jan 01, 2019 10:23 pm
DreamDiver wrote: ↑
Mon Dec 31, 2018 8:30 am
It's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Was the pressure up due to leaking though?
No, pressure will go *down* if leaks are bad enough, never up.
Ah ha! Thanks. Explains what I was viewing as strange behavior. Trying to get the leak stopped?
Here's one I came across a while back that shows it perfectly, massive leaks, and the machine dropping pressure to try and get the mask to seal:

Image

I'd seen it with Respironics, but that was the first set of data i'd gotten my hands on that showed it so clearly with a Resmed.
Got it. I've seen this a few times in my own charts. Just recently hit me that it might be doing to try and stop the leak. Before I had that thought, it seemed very wrong.

That is a clear example of it! Thanks again.