Yeah ....liars and lazier than I ampalerider wrote: ↑Fri Dec 21, 2018 10:04 pmDMEs lie a lot, it seems.Cynmatthes wrote: ↑Fri Dec 21, 2018 9:33 pmThere are 3 of us ladies in my exercise class who have sleep apnea. We were all given ff masks from the get go. One was told that is what came with the machine.
What else can I do?
Re: What else can I do?
I may have to RISE but I refuse to SHINE.
- babydinosnoreless
- Posts: 2376
- Joined: Fri Nov 02, 2018 2:53 pm
Re: What else can I do?
As I am learning. 
Re: What else can I do?
Bad night.Pugsy wrote: ↑Fri Dec 21, 2018 8:08 am
Post a detailed report for member input if you need to
Here's the format...we don't need or want all that SH will show you.
viewtopic/t158560/How-to-post-images-for-review.html
Re: What else can I do?
Bad night how?
Couldn't go to sleep for a long time?
Slept soundly but lots of events flagged?
We need some specifics. You did well after 1:30....makes me wonder what was going on the first part of the night and the bulk of the AHI is CA/central during that time frame and that makes me wonder if you had some issues falling asleep.
Couldn't go to sleep for a long time?
Slept soundly but lots of events flagged?
We need some specifics. You did well after 1:30....makes me wonder what was going on the first part of the night and the bulk of the AHI is CA/central during that time frame and that makes me wonder if you had some issues falling asleep.
I may have to RISE but I refuse to SHINE.
- DreamDiver
- Posts: 3082
- Joined: Thu Oct 04, 2007 11:19 am
Re: What else can I do?
It's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.

Most members of this forum are wonderful.
However, if you are the target of bullying on this forum, please consider these excellent alternative forums:
Apnea Board
Sleep Apnea Talk Forum
Free CPAP Advice
Be well,
Chris
Re: What else can I do?
In my experience (and opinions will likely vary) the absolute hardest part of the "xPap Life" is finding a mask that works best for your face. I'm on my 5th in about 6-months (current candidate: ResMed F30 FFM)... Like you, I've got the beard & stache. My AHI is low and my apnea from restricted airway is (I think) under control. My problem now is leaks that wake me up to fiddle with the mask. It's either air hitting my eyelids or the mask "farting" against my cheek or both (side-sleeper and back/shoulder issues have me turning occasionally).
Next thing I'm trying is a DIY mask-liner, as soon as I can get around to it. I don't expect the mask-liner to stop the leaks entirely (I won't complain if it does)-- my expectation is that it will make the leaks less noticeable so they won't wake me up as much.
Good Luck!
-JD
If you're not having a good time, *DO* something about it.
Re: What else can I do?
Had trouble going to sleep. Seemed like I woke up several times - I guess the high AHI is reflective of that. Less than 5 hours of sleep. Woke up with a slipping headache and terrible tinnitus.Pugsy wrote: ↑Mon Dec 31, 2018 8:15 amBad night how?
Couldn't go to sleep for a long time?
Slept soundly but lots of events flagged?
We need some specifics. You did well after 1:30....makes me wonder what was going on the first part of the night and the bulk of the AHI is CA/central during that time frame and that makes me wonder if you had some issues falling asleep.
I think my pillow is pushing on my mask and causing leakage. Last night i changed pillows and my AHI was under 2. I was exhausted and took an Advil PM, but I think I got about 4.5 hours of decent sleep. Took the mask off and slept about 4 more hours. I haven't slept that long since using the CPAP. I find if I wake up enough go to the RR or check the time after 4-5 hours of sleep with the mask I just can't go back to sleep with the mask.
Re: What else can I do?
Was the pressure up due to leaking though?DreamDiver wrote: ↑Mon Dec 31, 2018 8:30 amIt's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Re: What else can I do?
You need to understand how your machine reports the leak and the reported leaks relationship to the pressure.
Respironics machines report total leak...that's the mask's intentional vent/leak rate plus any excess leak. That's the top line you see on the SleepyHead leak graph.
All mask's have expected vent/intentional leak and those numbers will always increase as the pressure increase. So when you see the pressure go up....you can expect the total leak number/line to also go up just because of the pressure increase if nothing else.
The bottom leak line on the graph...a close approximation of excess only leak. Not 100% perfectly accurate because Respironics machines don't have a static red line threshold to go by. Instead it moves as the pressure moved. It's close though.
So your pressure wasn't increasing because of leak...the pressure was increasing because of the airway trying to collapse and the machine was trying to prevent the collapse with more pressure.
The increase in leak number you see...that's just a byproduct of the pressure increasing and is normal.
If you had a lot of difficulty initially falling asleep with lots of tossing and turning and arousals for quite a while then it is very possible that a good bit of those event flags you see during the 00:00 to about 1:15 or so aren't real events...meaning the machine likely flagged some awake/semi awake breathing irregularities by mistake. These machines have no way to measure sleep status...they only measure air flow and our awake/semi awake breathing is often irregular when compared to asleep breathing and it can and will flag awake/semi awake breathing irregularities as some sort of apnea event but they aren't real. They are only real if we are asleep.
If we aren't asleep they really don't count.
I suspect you finally fell asleep around 1:30 and the machine at that point started doing it's job with the increases in the pressure to try to keep the airway open.
Prior to that the machine didn't try to do much because even though it flagged some stuff...it wasn't really related to the airway collapsing.
The best way to fix that first 90 minutes of so of ugliness....figure out how to fall asleep faster.
And...yes...I know that is much easier said than done.
Sleeping from 1:30 to 4:30 is simply not enough sleep and you are going to feel like crap with that little sleep.
Sleeping without cpap for another few hours...that's untreated apnea sleep and that's not good either....and it's a real bad habit to get into. Bad habits are easy to make and really hard to break....don't go down that slippery slope.
Respironics machines report total leak...that's the mask's intentional vent/leak rate plus any excess leak. That's the top line you see on the SleepyHead leak graph.
All mask's have expected vent/intentional leak and those numbers will always increase as the pressure increase. So when you see the pressure go up....you can expect the total leak number/line to also go up just because of the pressure increase if nothing else.
The bottom leak line on the graph...a close approximation of excess only leak. Not 100% perfectly accurate because Respironics machines don't have a static red line threshold to go by. Instead it moves as the pressure moved. It's close though.
So your pressure wasn't increasing because of leak...the pressure was increasing because of the airway trying to collapse and the machine was trying to prevent the collapse with more pressure.
The increase in leak number you see...that's just a byproduct of the pressure increasing and is normal.
If you had a lot of difficulty initially falling asleep with lots of tossing and turning and arousals for quite a while then it is very possible that a good bit of those event flags you see during the 00:00 to about 1:15 or so aren't real events...meaning the machine likely flagged some awake/semi awake breathing irregularities by mistake. These machines have no way to measure sleep status...they only measure air flow and our awake/semi awake breathing is often irregular when compared to asleep breathing and it can and will flag awake/semi awake breathing irregularities as some sort of apnea event but they aren't real. They are only real if we are asleep.
If we aren't asleep they really don't count.
I suspect you finally fell asleep around 1:30 and the machine at that point started doing it's job with the increases in the pressure to try to keep the airway open.
Prior to that the machine didn't try to do much because even though it flagged some stuff...it wasn't really related to the airway collapsing.
The best way to fix that first 90 minutes of so of ugliness....figure out how to fall asleep faster.
And...yes...I know that is much easier said than done.
Sleeping from 1:30 to 4:30 is simply not enough sleep and you are going to feel like crap with that little sleep.
Sleeping without cpap for another few hours...that's untreated apnea sleep and that's not good either....and it's a real bad habit to get into. Bad habits are easy to make and really hard to break....don't go down that slippery slope.
I may have to RISE but I refuse to SHINE.
Re: What else can I do?
No, pressure will go *down* if leaks are bad enough, never up.Griffjfg wrote: ↑Tue Jan 01, 2019 10:23 pmWas the pressure up due to leaking though?DreamDiver wrote: ↑Mon Dec 31, 2018 8:30 amIt's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: What else can I do?
Exactly what my doctor said this week. He did four things:
1) Increased starting pressure from 5 to 8. I felt like my breathing was restricted when I first put the CPAP on.
2) Gave me some REMFresh. He feels after I adjust to the machine I won't need this.
3) He also wanted to try leaving my pressure at 8 for now, so he set it at 8. He said we may need to increase eventually.
4) Gave me a different nasal mask
The good news is I have had two good nights rest since these adjustments.
Also no headaches for two days and tinnitus back to normal levels.
Thanks again for all the information, help, and encouragement.
Re: What else can I do?
Ah ha! Thanks. Explains what I was viewing as strange behavior. Trying to get the leak stopped?palerider wrote: ↑Tue Jan 01, 2019 11:16 pmNo, pressure will go *down* if leaks are bad enough, never up.Griffjfg wrote: ↑Tue Jan 01, 2019 10:23 pmWas the pressure up due to leaking though?DreamDiver wrote: ↑Mon Dec 31, 2018 8:30 amIt's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
Re: What else can I do?
good to now you are sleeping better. wanted to ask about the remfresh. this is the first i've heard of it and went off to google it. think i might try this myself.
i still have fragmented sleep. do you think this helped you to stay asleep?
anyone else try this?
"Age is not an accomplishment and youth is not a sin"-Robert A. Heinlein
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Re: What else can I do?
Here's one I came across a while back that shows it perfectly, massive leaks, and the machine dropping pressure to try and get the mask to seal:djams wrote: ↑Sat Jan 05, 2019 11:20 amAh ha! Thanks. Explains what I was viewing as strange behavior. Trying to get the leak stopped?palerider wrote: ↑Tue Jan 01, 2019 11:16 pmNo, pressure will go *down* if leaks are bad enough, never up.Griffjfg wrote: ↑Tue Jan 01, 2019 10:23 pmWas the pressure up due to leaking though?DreamDiver wrote: ↑Mon Dec 31, 2018 8:30 amIt's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.

I'd seen it with Respironics, but that was the first set of data i'd gotten my hands on that showed it so clearly with a Resmed.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: What else can I do?
Got it. I've seen this a few times in my own charts. Just recently hit me that it might be doing to try and stop the leak. Before I had that thought, it seemed very wrong.palerider wrote: ↑Sat Jan 05, 2019 2:40 pmHere's one I came across a while back that shows it perfectly, massive leaks, and the machine dropping pressure to try and get the mask to seal:djams wrote: ↑Sat Jan 05, 2019 11:20 amAh ha! Thanks. Explains what I was viewing as strange behavior. Trying to get the leak stopped?palerider wrote: ↑Tue Jan 01, 2019 11:16 pmNo, pressure will go *down* if leaks are bad enough, never up.Griffjfg wrote: ↑Tue Jan 01, 2019 10:23 pmWas the pressure up due to leaking though?DreamDiver wrote: ↑Mon Dec 31, 2018 8:30 amIt's interesting that the CA's (and even OA's) mostly resolve when your pressure is higher.
I'd seen it with Respironics, but that was the first set of data i'd gotten my hands on that showed it so clearly with a Resmed.
That is a clear example of it! Thanks again.

