project progress reports updates
project progress reports updates
myself and a friend of mine have started the process of getting resmed S9 machines on a network, also we are looking into reading S8 type cards and maybe even getting S8 on a network if possible
still in the research stages at this point, just reporting that work has started on this project
this had been requested by a few.
still in the research stages at this point, just reporting that work has started on this project
this had been requested by a few.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: project progress reports updates
0.0
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: project progress reports updates
Please excuse my ignorance as I am a complete newbie. What exactly is the goal and what would be the benefit of this?
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Re: project progress reports updates
to be able to access resmed machines data with out removing the data chip, also to be able to read a S8 chip so it can be moved to a SD chip so the data can be used at home. working on being able to do wireless networking and wire based.Sharrykb wrote:Please excuse my ignorance as I am a complete newbie. What exactly is the goal and what would be the benefit of this?
it makes it easy to get your data from resmed machines and add them to a network both the S8 and S9, and what ever other model uses the S8 chip should be work as well.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: project progress reports updates
Okay, thank you for the explanation.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Re: project progress reports updates
space45 wrote:to be able to access resmed machines data with out removing the data chip, also to be able to read a S8 chip so it can be moved to a SD chip so the data can be used at home. working on being able to do wireless networking and wire based.Sharrykb wrote:Please excuse my ignorance as I am a complete newbie. What exactly is the goal and what would be the benefit of this?
it makes it easy to get your data from resmed machines and add them to a network both the S8 and S9, and what ever other model uses the S8 chip should be work as well.
Why do we need a network?. What about privacy? What's so hard about pulling out a data chip and loading it on a PC. I think you should spend more time trying to figure out why you are having trouble with your own therapy. Also...By the time you figure all this out, there will be few S8s in existance. There are very few in use on this board now.
viewtopic/t97140/dry-mouth-and-full-mas ... o-max.html
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: project progress reports updates
They quit building the S8's over 5 years ago.
Anyone sold one as "new" is being "hosed"--and not in a good way!
Anyone sold one as "new" is being "hosed"--and not in a good way!
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: project progress reports updates
Yeah that pretty much sums up my thoughts on it but I wasn't sure I should trust my opinion due to the fact that I'm a complete newbie. I don't even get my S9 until sometime this week.LSAT wrote:space45 wrote:to be able to access resmed machines data with out removing the data chip, also to be able to read a S8 chip so it can be moved to a SD chip so the data can be used at home. working on being able to do wireless networking and wire based.Sharrykb wrote:Please excuse my ignorance as I am a complete newbie. What exactly is the goal and what would be the benefit of this?
it makes it easy to get your data from resmed machines and add them to a network both the S8 and S9, and what ever other model uses the S8 chip should be work as well.
Why do we need a network?. What about privacy? What's so hard about pulling out a data chip and loading it on a PC. I think you should spend more time trying to figure out why you are having trouble with your own therapy. Also...By the time you figure all this out, there will be few S8s in existance. There are very few in use on this board now.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Re: project progress reports updates
your network can be a private network, or plug in wire or turn on wireless when reading it, then unplug or turn off the wireless.LSAT wrote:Why do we need a network?. What about privacy? What's so hard about pulling out a data chip and loading it on a PC. I think you should spend more time trying to figure out why you are having trouble with your own therapy. Also...By the time you figure all this out, there will be few S8s in existance. There are very few in use on this board now.
do you have important personal info on the unit? I did not put any personal info in, so what if some hacker gets in, what is there to see? the network is read only, no writing to the chip. so they down load your PAP data, what of it?
that info is of no use or interest to anyone but you. so there is no problems with it being on your private behind your router public net full time. can the network be hacked, yes, could they see you PAP info, good chance of it, so what, nothing of interest to them.
as for my therapy I do not see that as a full time job. I can multi task
as for the S8 option, my friend that is helping out wants his done as well and it is a S8, so thought we would give it a try, if not to hard it will be done.
this should not be too hard a thing to do. ordered some hardware for it, I am hoping this will be a quick and easy do, I could hit a snag as the resmed may not play nice. should be fun
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: project progress reports updates
no data capture on S8 it looks like so no reason to read data chip
my friend will not be happy
my friend will not be happy
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: project progress reports updates
What would this cost? I do not see a lot of complexity / irritation of just pulling the SD card out and plugging it into my computer to get the data.
value = benefit/cost ... I do not see benefit being very large so cost would have to be quite small to be any value to me.
value = benefit/cost ... I do not see benefit being very large so cost would have to be quite small to be any value to me.
Re: project progress reports updates
There's no wave flow on any S8, but S8 Elites and S8 Autosets do record a substantial amount of data that can be seen in ResScan, including when each event occured. Six or seven years ago these were the full efficacy data machines of choice from ResMed.space45 wrote:no data capture on S8 it looks like so no reason to read data chip
But if your friend has an S8 Escape, then there is no data beyond usage data.
_________________
Machine: DreamStation BiPAP® Auto Machine |
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Additional Comments: PR System DreamStation and Humidifier. Max IPAP = 9, Min EPAP=4, Rise time setting = 3, minPS = 3, maxPS=5 |
- thesleepermustawake
- Posts: 72
- Joined: Sun Apr 13, 2014 6:20 am
- Location: UK
Re: project progress reports updates
This is interesting, I was just thinking that it would be cool to access the data directly through wireless or ethernet. I'm waiting for my Resmed S9 to arrive but I hadn't looked into the specs at all. Does anyone know if it has network capabilities?
My goal is to build a web app which could automatically pull the data and refresh the reports.
My goal is to build a web app which could automatically pull the data and refresh the reports.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear |
Additional Comments: -- |
Re: project progress reports updates
You Kids Have Fun!!
Re: project progress reports updates
Thank you Sludge! I was thinking I had seen something like that but couldn't find it yesterday when I went looking.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |