ResMed s9 Autoset stopped to read SD card

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
gailandartie
Posts: 87
Joined: Tue Jun 24, 2008 6:46 pm
Location: United States

ResMed s9 Autoset stopped to read SD card

Post by gailandartie » Wed Dec 12, 2012 1:03 am

Last night,I had my ResMed s9 Autoset on. Luckily, I was awake and suddenly it stop blowing. The message on the display said "Reading SD card". When it was done reading, the machine started again.

Has this happened to anyone?

Gail

_________________
Mask: Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: CMS Model 60-C Pulse Oximeter
Top
User avatar
Denial Dave
Posts: 1335
Joined: Wed Sep 19, 2012 6:45 am
Location: Connecticut

Re: ResMed s9 Autoset stopped to read SD card

Post by Denial Dave » Wed Dec 12, 2012 6:09 am

My S9 bilevel machine does that everytime I turn it on, after I've removed the card to review data. But it's never done that.

Could you have had a brief power outage and as a result the machine rebooted / restarted?

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Started at VPAP pressure setting of 20/14.4. I've survived Stage 1 cancer and lost 80+ lbs. Pressure is now 14.5 / 11
if you don't know where you are going... any road will take you there.... George Harrison
Top
User avatar
Dive Apnea
Posts: 129
Joined: Thu Jul 28, 2011 3:37 pm

Re: ResMed s9 Autoset stopped to read SD card

Post by Dive Apnea » Wed Dec 12, 2012 3:31 pm

My card reads now. DOH

Hope OP gets their SD prob solved.

_________________
Mask: Mirage™ FX Nasal CPAP Mask with Headgear
Last edited by Dive Apnea on Wed Dec 12, 2012 3:47 pm, edited 1 time in total.
Pressure: 10
Top
User avatar
billbolton
Posts: 2264
Joined: Wed Jun 07, 2006 7:46 pm
Location: Sydney, Australia

Re: ResMed s9 Autoset stopped to read SD card

Post by billbolton » Wed Dec 12, 2012 3:45 pm

gailandartie wrote:Has this happened to anyone?
If you have mans power interruption, the S9 will just stop. When the mains power comes back on, the S9 it will go through its normal power-up sequence, where it reads the SD card, and will then start doing whatever it was doing when the power was interrupted.

So, it is very highly likely you had what was probably a brief mains power outage.

Cheers,

Bill

_________________
MachineMask
Additional Comments: Airmini, Medistrom Pilot 24, CMS 60C Pulse Oximeter, ResScan 6
Top


Return to “CPAP and Sleep Apnea Message Board”