Bloody nose
- Thetoolman
- Posts: 74
- Joined: Fri Jun 08, 2012 7:53 pm
- Location: 100 miles south of Atlanta
- Contact:
Bloody nose
I have been waking up with a bloody nose. I have the humidity turned up to 1 . any ideas on what i shouldf do??
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: use an oxigen concentrator and also use resperonics full life mask |
Re: Bloody nose
Isn't 1 the lowest humidity setting on the ResMed? Do you need to turn it up?Thetoolman wrote:I have been waking up with a bloody nose. I have the humidity turned up to 1 . any ideas on what i shouldf do??
_________________
Machine: AirSense 10 AutoSet with Heated Humidifer + Aifit N30i Nasal Mask Bundle |
Additional Comments: SleepyHead-now-OSCAR software on Mac OSX Ventura |
- SolSionnach
- Posts: 50
- Joined: Mon Jul 23, 2012 9:12 am
- Location: Texas
Re: Bloody nose
Yes, '1' is the lowest humidity. I'd turn it up to at least 3 or 3.5, for starters. I like it at 4 most of the time.
_________________
Mask: Swift™ FX Bella Nasal Pillow CPAP Mask with Headgears |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: I ADORE my padacheek FFM liner, and also use a Mirage Quattro FF mask, trying the Amara FF soon. |
- Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: Bloody nose
Try some saline nasal spray half an hour before masking up. Also up the humidity setting before you call in the doctors. Unfortunately we don't know your therapy pressures, so that somewhat limits possible suggestions. Maybe give us some more detail. At what point does your nose bleed? Does it bleed for a long time or is it just spotty? Is this every night or every once in awhile. You get the picture.
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Bloody nose
Make sure you are using distilled water, and keep the tank clean.
Saline nasal spray or gel may help, It's probably dryness.
My humidifier is set at 3, below which I get the same problem.
Even 2.5 is not enough for my little green sniffer.
Saline nasal spray or gel may help, It's probably dryness.
My humidifier is set at 3, below which I get the same problem.
Even 2.5 is not enough for my little green sniffer.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
- Thetoolman
- Posts: 74
- Joined: Fri Jun 08, 2012 7:53 pm
- Location: 100 miles south of Atlanta
- Contact:
Re: Bloody nose
THANKS, I HAVE JACKED THE HUMIDITY UP TO 3.5 & IT SEEM SOME BETTER!!
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: use an oxigen concentrator and also use resperonics full life mask |