machine stats

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
bladerfc
Posts: 7
Joined: Sun Mar 11, 2012 2:41 pm

machine stats

Post by bladerfc » Tue Mar 13, 2012 1:32 am

How do you get your stats for your machine iv had my cpap since august and I've never been told any stats like how many apneas I'm having or mask leakage ps I'm from Scotland maybe diferent way of working ?

bladerfc
Posts: 7
Joined: Sun Mar 11, 2012 2:41 pm

Re: machine stats

Post by bladerfc » Tue Mar 13, 2012 1:46 am

Forgot to say my machine is a res med escape 2 s8

nlifesimage
Posts: 12
Joined: Sun Feb 19, 2012 10:17 am
Location: Great Bend, KS

Re: machine stats

Post by nlifesimage » Tue Mar 13, 2012 2:07 am

I found information about it here on Resmed website. I dont use your type of machine, hopefully this helped??

http://www.resmed.com/us/assets/documen ... er_eng.pdf

Jas.

cflame1
Posts: 3312
Joined: Sat Mar 11, 2006 6:55 am
Location: expat Canadian in Kentucky

Re: machine stats

Post by cflame1 » Tue Mar 13, 2012 4:50 am

bladerfc wrote:Forgot to say my machine is a res med escape 2 s8
The machine that you have... won't give you any stats other than hours used.

User avatar
Sir NoddinOff
Posts: 4190
Joined: Mon May 14, 2012 5:30 pm
Location: California

Re: machine stats

Post by Sir NoddinOff » Mon May 21, 2012 5:03 pm

To say your Escape II has no data other than machine hours might be incorrect. Looking at the User Manual it clearly shows a SD data card inserted into the back... plus it says that a sleep doctor can help gauge your progress via downloading the card info, ie. that seems to me, to mean one can get the basic data off the card which shows AHI, flow rate and leaks etc. If you're still interested PM me and I'll look into helping you get that data into Sleepyhead software or whatever.

All hail Rebus and Taggart.

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.

User avatar
Pugsy
Posts: 64988
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: machine stats

Post by Pugsy » Mon May 21, 2012 6:31 pm

Sir NoddinOff wrote:To say your Escape II has no data other than machine hours might be incorrect. Looking at the User Manual it clearly shows a SD data card inserted into the back... plus it says that a sleep doctor can help gauge your progress via downloading the card info, ie. that seems to me, to mean one can get the basic data off the card which shows AHI, flow rate and leaks etc. If you're still interested PM me and I'll look into helping you get that data into Sleepyhead software or whatever.
No, there is no useful data beyond how many hours the machine has been used on the S8 Escape II or the S9 Escape.
The S8 uses a special card reader to utilize any software and it is hard to find and expensive and worthless for the S8 Escape.
No sense in even going there since nothing can be gained. The S9 Escape does use a SD card and it is easier to use the software and see the hours of use but it gathers nothing else. Gauging progress with either means how many hours you use the machine and nothing else.
Anyone with a S8 machine can't use SleepyHead anyway...even if they did have a machine that gathers full efficacy data. SH only works with SD card machines. Doesn't work for the older Respironics that use the smart card and a special card reader either.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.