Need new help for Resmed Tango C Series

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
clay02
Posts: 4
Joined: Sat Oct 02, 2010 10:52 am

Need new help for Resmed Tango C Series

Post by clay02 » Sat Oct 02, 2010 12:35 pm

Thank you so much for the previous help, but I seemed to have changed nsomething I didn't mean to when trying to adjust the pressure. I held down the Ramp button and the Down-Arrow button and numbers started changing, from what I dont know because they changed so fast. In some kind of program mode I guess it reads (CO 0.82)??

User avatar
jdm2857
Posts: 2982
Joined: Wed Aug 20, 2008 8:29 pm
Location: South Jersey

Re: Need new help for Resmed Tango C Series

Post by jdm2857 » Sat Oct 02, 2010 2:04 pm

If you go over to http://www.apneaboard.com and register, I believe that you can request an email with the full instructions for the ResMed C-Series Tango.
jeff

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: Need new help for Resmed Tango C Series

Post by Wulfman » Sat Oct 02, 2010 2:40 pm

jdm2857 wrote:If you go over to http://www.apneaboard.com and register, I believe that you can request an email with the full instructions for the ResMed C-Series Tango.
I don't know that it exists over there, but I did post a link to the directions here.

viewtopic/t56036/Resmed-Tango-C-Series.html


Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05