FisherPaykel hc254

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Tat2dSleeper
Posts: 2
Joined: Tue Jun 08, 2010 5:26 pm
Location: SWNY

FisherPaykel hc254

Post by Tat2dSleeper » Tue Jun 08, 2010 5:38 pm

Ive been on CPAP a couple of years and had the RemStarPro with Software etc. About a year ago I started having some probs and my Sleep Dr recommended and AutoPap for a week to see if I needed a pressure change.

Got the AutoPap, called the DME several times to get my results and they never called back. I mentioned this to my PCP and she looked in my records. Lo and behold, they had changed my pressure from 8 to 10. No one told me!!

Anyhoo, I decided I wanted a new machine. Ha, ha. Called DME several times, no one called me back. I went and bought an auto online, got the setup instructions and went to town. Ive ordered the software but it'll be a while.

I hope she calls soon..maybe Ill even call them just to hear the reaction.

My CPAP pressure was 10 so I set the auto at 5 minimum and 12 max. Does that sound about right?

Just venting...thanks

_________________
Mask: Ultra Mirage™ Full Face CPAP Mask with Headgear
Additional Comments: Waiting for the software to arrive.

cflame1
Posts: 3311
Joined: Sat Mar 11, 2006 6:55 am
Location: expat Canadian in Kentucky

Re: FisherPaykel hc254

Post by cflame1 » Tue Jun 08, 2010 7:41 pm

If your pressure's supposed to be 10... then 5 will be way too low, wouldn't want to go more than 2 under your required pressure, at least not to start.

Reason for this is that it takes time to get to your required pressure if that's what it takes to clear your events.

drubin007
Posts: 242
Joined: Fri May 15, 2009 7:31 am
Location: Boynton Beach, Florida

Re: FisherPaykel hc254

Post by drubin007 » Wed Jun 09, 2010 12:36 pm

where is the software coming from, austraulia?

good machine though, I have been using it for about a good 10 months now I think

_________________
MaskHumidifier

Hrast
Posts: 24
Joined: Fri Mar 19, 2010 9:23 am

Re: FisherPaykel hc254

Post by Hrast » Wed Jun 09, 2010 3:24 pm

Mine was set 4-18 when I got it with the Auto pressure set to 10. I thought it used the low end as the pressure to ramp from/to (SenseAwake I believe is their trademarked term). I think its now 6-18 and 11 based on what I'm seeing in my reports. Some people say lower pressures make them feel like they are suffocating, but then again, I'm using a full face mask and not pillows or a nasal mask.

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Additional Comments: Backup Machine: F&P HC254

User avatar
Tat2dSleeper
Posts: 2
Joined: Tue Jun 08, 2010 5:26 pm
Location: SWNY

Re: FisherPaykel hc254

Post by Tat2dSleeper » Wed Jun 09, 2010 4:09 pm

drubin007 wrote:where is the software coming from, austraulia?

good machine though, I have been using it for about a good 10 months now I think
Yup, Australia. $39. I saw an American site that was selling it for $200+
cflame1 wrote:If your pressure's supposed to be 10... then 5 will be way too low, wouldn't want to go more than 2 under your required pressure, at least not to start.

Reason for this is that it takes time to get to your required pressure if that's what it takes to clear your events.
Sounds about right, I'll raise it up. Thanks

_________________
Mask: Ultra Mirage™ Full Face CPAP Mask with Headgear
Additional Comments: Waiting for the software to arrive.