How many hours should an XPAP machine last?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Zoot
Posts: 66
Joined: Wed Oct 29, 2008 2:15 am
Location: Columbia SC

How many hours should an XPAP machine last?

Post by Zoot » Fri Nov 14, 2008 5:40 am

2,3, 5 years?

Discuss

Show your work.
Madness take its toll, please have exact change.

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: How many hours should an XPAP machine last?

Post by Wulfman » Fri Nov 14, 2008 6:29 am

New machines are warranted for two years.....three in Canada (I'm told). If you have any problems in that time, they should be taken care of........hopefully you have a backup machine to use in the weeks that they're sent back to the factory.

Beyond that.......no telling. The word "should" in your subject heading is the operative.
I have two that are over three years old. Neither have been used continuously during that time and my original Pro 2 got sent into the factory at about the 1 1/2 year mark to fix a little "wheeze" in the C-Flex mechanism (and get the clock back in sync) before the warranty time ran out, but they're still doing well.
I think the number of (blower) "hours" may be more of a determining factor than the number of "years".......maybe.

Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
Paul56
Posts: 1016
Joined: Thu Sep 25, 2008 1:38 pm
Location: Texas

Re: How many hours should an XPAP machine last?

Post by Paul56 » Fri Nov 14, 2008 6:52 am

Zoot wrote:2,3, 5 years?

Discuss

Show your work.
"Show your work"...

I agree with Den... it is not duration of time but the actual hours used that is the important number... not that we can expect failure after a certain number of hours.

I would say with most devices if they have not failed early on in their life that they may actually turn out to be very reliable for a long period of time. It is that initial period of usage where problems may appear due to faulty components or assembly.

The other factor is how well taken care of the machine is. Be gentle with devices and they stand a better chance of lasting longer.

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Additional Comments: AHI ~60 / Titrated @ 8 / Operating AutoSet in CPAP mode @ 12

Engine 88

Re: How many hours should an XPAP machine last?

Post by Engine 88 » Fri Nov 14, 2008 7:09 am

I have a Resperonics classic auto ,AKA the tank, with 5000 hours on . Last week it bounced off the floor from about a 3 foot height and it still runs great.

Zoot
Posts: 66
Joined: Wed Oct 29, 2008 2:15 am
Location: Columbia SC

Re: How many hours should an XPAP machine last?

Post by Zoot » Fri Nov 14, 2008 7:33 am

OK,

Don't run it every night and about every 5000 hours drop it on the floor. Great! Thanks guys!!!

Madness take its toll, please have exact change.

S-Dubya
Posts: 125
Joined: Tue Dec 12, 2006 4:45 pm
Location: Utah

Re: How many hours should an XPAP machine last?

Post by S-Dubya » Fri Nov 14, 2008 9:10 am

I'll have to check the # of hours when I get home this evening, but I have been using my machine every night for over 5.5 years. No problems whatsoever.

Although, I am thinking about upgrading to APAP sometime soon.

_________________
MaskHumidifier

Engine 88

Re: How many hours should an XPAP machine last?

Post by Engine 88 » Fri Nov 14, 2008 9:12 am

If I had to give a number I would say that 4 to 5 years would be great. You have machines that could give you a problem right from the start. Although they should be covered under warrantee. You also have machines that last quite a long time. My wife works with a women whose husband is on his second machine and he's been on cpap for 20 years. You never know when the machine will give you a problem. That's why it's important to have a back up.My back up is a Resporonics series M Cpap with about 2000 hrs on it. It is also the one that I take primitive camping and run on a deep cycle battery for 4 or 5 nights.

Have a great day and night
Dick

DME Daddy

Re: How many hours should an XPAP machine last?

Post by DME Daddy » Fri Nov 14, 2008 3:43 pm

CPAP's machines should last a minimum of 25,000 hours. I have seen many that have run longer.

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: How many hours should an XPAP machine last?

Post by Wulfman » Fri Nov 14, 2008 4:14 pm

DME Daddy wrote:CPAP's machines should last a minimum of 25,000 hours. I have seen many that have run longer.
I agree.

Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
BASCONERO
Posts: 97
Joined: Fri Aug 08, 2008 1:40 pm
Location: MILANO - ITALY ( SUN'S LAND! )

Re: How many hours should an XPAP machine last?

Post by BASCONERO » Fri Nov 14, 2008 5:00 pm

Hi all peoples, I'm using my 2nd machine ( REMSTAR AUTO CFLEX ) since 6 July 2007 and now it has 4240 hours of usage without no problem!!

Zoot
Posts: 66
Joined: Wed Oct 29, 2008 2:15 am
Location: Columbia SC

Re: How many hours should an XPAP machine last?

Post by Zoot » Fri Nov 14, 2008 9:27 pm

BASCONERO wrote:Hi all peoples, I'm using my 2nd machine ( REMSTAR AUTO CFLEX ) since 6 July 2007 and now it has 4240 hours of usage without no problem!!
At 7 hours a sleep a night that is only 607 days.
Madness take its toll, please have exact change.

User avatar
nightjar
Posts: 123
Joined: Thu Sep 25, 2008 9:18 am
Location: Spring Green, WI

Re: How many hours should an XPAP machine last?

Post by nightjar » Fri Nov 14, 2008 10:27 pm

DME Daddy wrote:CPAP's machines should last a minimum of 25,000 hours. I have seen many that have run longer.
My HealthDyne Tranquility Quest was in use for just over 10.5 years, which means it has roughly 27,000 hours on it.

Then again, it's a simpler machine than most of the ones we use today--even though it doesn't look so simple on the inside. I hope my newly purchased Respironics "classic" BiPAP Auto will last that long, but I'm not holding my breath. But I am holding on to the Tranquility Quest as a backup, that's for sure!

nath

User avatar
Goofproof
Posts: 16087
Joined: Mon Dec 05, 2005 3:16 pm
Location: Central Indiana, USA

Re: How many hours should an XPAP machine last?

Post by Goofproof » Sat Nov 15, 2008 12:40 am

S-Dubya wrote:I'll have to check the # of hours when I get home this evening, but I have been using my machine every night for over 5.5 years. No problems whatsoever.

Although, I am thinking about upgrading to APAP sometime soon.
You mean downgrading, you have "Tank", it's downhill from there. Jim
Use data to optimize your xPAP treatment!

"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire

Lord Darth Beavis
Posts: 30
Joined: Fri Oct 31, 2008 12:03 am
Location: Texas, where men are men, women are women and critters from Alpha Centauri are dinner!
Contact:

Re: How many hours should an XPAP machine last?

Post by Lord Darth Beavis » Sat Nov 15, 2008 6:05 am

I have a Remstar in my closet that has almost 8000 hours on it, but has a board that is going bad. Makes a good backup, though.

_________________
Mask
Additional Comments: 4-year member of the hose-head fraternity
Pimpin' ain't easy, yo!

WNJ
Posts: 264
Joined: Fri Jan 06, 2006 9:35 pm
Location: Southeast Ohio

Re: How many hours should an XPAP machine last?

Post by WNJ » Sat Nov 15, 2008 10:14 am

My original REMstar Auto has 6700+ hours with no problem so far. I'm not sure how many hours I have on my second REMstar Auto, as it is at our other house.

Wayne

_________________
Mask: Ultra Mirage™ Full Face CPAP Mask with Headgear
Additional Comments: APAP w/CFlex @ 10 cm to 14 cm