I am looking for a leak rate chart or numbers for a ComfortFusion nasal mask. I got the leak rate down to 31.5 for a 7 day average. My AHI is at 1.1 for the last 7 days.
Thanks, Ron
Leak Rate for ComfortFusion
- SuperGeeky
- Posts: 414
- Joined: Mon May 19, 2008 3:55 pm
- Location: MaryEtta, Gawga (Now a part of the Union)
I was one of the testers for that mask, before it was produced.
I had a Zero leaks with it!
I thought it was a pretty great mask.
For some reason, it leaks like crazy now. I think because my pressure went up.
I am no help with the leak rate chart, but you should call Respironics and see if they can help you.
I had a Zero leaks with it!
I thought it was a pretty great mask.
For some reason, it leaks like crazy now. I think because my pressure went up.
I am no help with the leak rate chart, but you should call Respironics and see if they can help you.
- SuperGeeky
- Posts: 414
- Joined: Mon May 19, 2008 3:55 pm
- Location: MaryEtta, Gawga (Now a part of the Union)
Well, I saw the Sleep Doc. We went over Compliance and I asked him about the mask leakage.
I thought his answer really merited common sense. If my AHI is within a reasonable range, mask leak rate is not an issue.
In other words, if it ain't broke don't fix it. I was paying too much attention to the leak rate and started tightening my mask to the point it's uncomfortable.
Hence, less sleep.
Now, I can see how it's easy to focus on the wrong variable. Tightening the mask, taping the mouth and before you know it my sleep suffers.
The Comfort Fusion is designed for maximum comfort with the least amount of leaks.
The instructions are perfect for me. Sit up in bed, turn the Cpap/BiPap on, pull the velcro on either side until air stops escaping around the seal. Lay down and gravity pulls it a little tighter.
I'm at the point where I've settled in on the right dimensions. Simple as popping the side strap in and laying down.
I do suppose after period of time, six months I think, you replace the gel pillow part of it. I would imagine slight cracks form with use.
Take care,
SG
I thought his answer really merited common sense. If my AHI is within a reasonable range, mask leak rate is not an issue.
In other words, if it ain't broke don't fix it. I was paying too much attention to the leak rate and started tightening my mask to the point it's uncomfortable.
Hence, less sleep.
Now, I can see how it's easy to focus on the wrong variable. Tightening the mask, taping the mouth and before you know it my sleep suffers.
The Comfort Fusion is designed for maximum comfort with the least amount of leaks.
The instructions are perfect for me. Sit up in bed, turn the Cpap/BiPap on, pull the velcro on either side until air stops escaping around the seal. Lay down and gravity pulls it a little tighter.
I'm at the point where I've settled in on the right dimensions. Simple as popping the side strap in and laying down.
I do suppose after period of time, six months I think, you replace the gel pillow part of it. I would imagine slight cracks form with use.
Take care,
SG
Next time, ask your doctor about mouth leaking.
More specifically, ask him how the machine can register apneas and hypopneas when all the extra pressure blows out of your open mouth.
Ask him also how the machine can build up the necessary pressure to stent your airway open, if pressurized air is pouring out of your mouth and into your bedroom, instead of down your airway.
Like water, pressurized aire goes the path of least resistance.
I do wonder what your doc. defines as a reasonable range.
O,
More specifically, ask him how the machine can register apneas and hypopneas when all the extra pressure blows out of your open mouth.
Ask him also how the machine can build up the necessary pressure to stent your airway open, if pressurized air is pouring out of your mouth and into your bedroom, instead of down your airway.
Like water, pressurized aire goes the path of least resistance.
I do wonder what your doc. defines as a reasonable range.
O,
And now here is my secret, a very simple secret; it is only with the heart that one can see rightly, what is essential is invisible to the eye.
Antoine de Saint-Exupery
Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023
Antoine de Saint-Exupery
Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023
-
Guest
I think you answered your own questions. If your AHI jumps, your leak rate relative to before increases and your mask is snug, what could it be?
Three choices really:
You rolled around and knocked your mask loose for a moment or longer
Slight air came out of your lips.
Or, your mouth is wide open i.e. nose is clogged in middle of night
It's really not the quantitative number, it's qualitative number. What is it relative to before and how does it relate to your AHI.
So, if I'm given a chart for this mask, expected leakage is 27 for example, that gives me an idea but if it's 32 and my AHI is 1.9. I'm not going to start taping my mouth Nor am I going to tighten the mask as much as I can tolerate.
I think that's what the Sleep Doc is saying, that's the way I understand it.
Take care,
SG
Three choices really:
You rolled around and knocked your mask loose for a moment or longer
Slight air came out of your lips.
Or, your mouth is wide open i.e. nose is clogged in middle of night
It's really not the quantitative number, it's qualitative number. What is it relative to before and how does it relate to your AHI.
So, if I'm given a chart for this mask, expected leakage is 27 for example, that gives me an idea but if it's 32 and my AHI is 1.9. I'm not going to start taping my mouth Nor am I going to tighten the mask as much as I can tolerate.
I think that's what the Sleep Doc is saying, that's the way I understand it.
Take care,
SG

