Clueless understanding A flex reporting. Help!

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
ReedRichards
Posts: 54
Joined: Sat Apr 12, 2008 8:42 am

Clueless understanding A flex reporting. Help!

Post by ReedRichards » Sun Jun 22, 2008 10:34 am

Brain Trust,

When I'm reviewing the report, what is the most important thing that I should be looking for? I do know that I'm averaging about 5 AHI per hour. Someone help me understand what I should be looking for. Leaks? Snoring?

Thanks for the assist!


User avatar
bdp522
Posts: 3378
Joined: Tue Jun 27, 2006 5:13 pm

Post by bdp522 » Sun Jun 22, 2008 12:26 pm

You are looking for an AHI of under 5. You are also looking for a leak rate that is in line for the mask you are using. A nice straight line is better than a line with big waves and bumps. Snores are not as important, but should be low.

Brenda


_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Love my papillow, Aussie heated hose and PAD-A-CHEEKS! Also use Optilife, UMFF(with PADACHEEK gasket), and Headrest masks Pressure; 10.5

User avatar
ReedRichards
Posts: 54
Joined: Sat Apr 12, 2008 8:42 am

Clueless understanding A flex reporting. Help!

Post by ReedRichards » Sun Jun 22, 2008 1:06 pm

It's about right around 5, slightly under. I want to get like some of the people on the site that have 0 events and get it at 0.2 AHI per hour. The air leaks are at.

I'll provide some results so that all can provide some insight.

For two weeks, I averaged as follows. Roughly 6 hours of sleep.

Average 90% 8.1
Average CPap Pressure 5.5

Average Non responsive Apnea/Hypopnea Indez 0.0
Average Obstructtive Apnea Indez 1.5
Average Hypopnea Index is 3.3
Average AHI is 4.8

Average Flow Limitation Index 1.0
Average Vibraratory Snore Index 1.1

Average Max leak is 60.6
Average 90% leak 32.7
Average Leak is 26.7
Average Large leak 0 seconds.

Any assistance with the numbers would be great!

[/img]


User avatar
Snoredog
Posts: 6397
Joined: Sun Mar 19, 2006 5:09 pm

Re: Clueless understanding A flex reporting. Help!

Post by Snoredog » Sun Jun 22, 2008 2:56 pm

[quote="ReedRichards"]It's about right around 5, slightly under. I want to get like some of the people on the site that have 0 events and get it at 0.2 AHI per hour. The air leaks are at.

I'll provide some results so that all can provide some insight.

For two weeks, I averaged as follows. Roughly 6 hours of sleep.

Average 90% 8.1
Average CPap Pressure 5.5

Average Non responsive Apnea/Hypopnea Indez 0.0
Average Obstructtive Apnea Indez 1.5
Average Hypopnea Index is 3.3
Average AHI is 4.8

Average Flow Limitation Index 1.0
Average Vibraratory Snore Index 1.1

Average Max leak is 60.6
Average 90% leak 32.7
Average Leak is 26.7
Average Large leak 0 seconds.

Any assistance with the numbers would be great!

[/img]

someday science will catch up to what I'm saying...

jomac30
Posts: 210
Joined: Thu Jan 25, 2007 8:20 am

Post by jomac30 » Sun Jun 22, 2008 3:06 pm

what does flow limitation mean?
Started: 1/25/07 Pressure: 13
Masks: Comfortselect, Comfortgel, Comfortlite 2, UMFF, Optilife

User avatar
deerslayer
Posts: 1195
Joined: Tue Dec 11, 2007 10:46 am
Location: Mid Tn

Post by deerslayer » Sun Jun 22, 2008 7:28 pm

Flow limitation is explained here. this link is in all my posts. also a leak rate chart http://www.resmed.com/en-en/clinicians/ ... 40x380.swf

_________________
MachineMask
Additional Comments: straight cpap 12.20 AHI avg.0.79
RESMED AUTOSET 11/ P 10 NASAL PILLOWS /straight cpap 11.50/ AHI 1.0 per hr

Feeling Blessed & firmly believe in The Holy Trinity 🙏