Newbie to CPAP w/ Questions

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
CUatX
Posts: 59
Joined: Thu May 22, 2008 5:46 am
Location: NE TN

Newbie to CPAP w/ Questions

Post by CUatX » Thu May 22, 2008 6:34 am

HI! My name is Frank, and I'm new to the therapy and in the process of selecting a machine & provider. So far, I've been shown a Respironics Sleepeasy, a Fisher & Paykel Sleepstyle 200, and a Resmed Elite S8, all with heated humidifiers. Right now, I have a strong preference for the Elite S8.

I plan to spend the next few days exploring options and costs, and in the process hope to find a local dealer for the DeVilbiss IntelliPap. On paper it looks very attractive, especially the auto-adjust feature, compact size, & ability to run directly from an RV battery without inverter or "power conditioner" module.

During sleep tests, I tried and liked a nasal pillow mask.

1) I realize this is a Ford/Chevy question, but any comments + or - you'd care to offer on the above machines? Any recommendations on others?

2) Any suggestions on the nasal pillow mask? My prescribed pressure is 7 cm/H2O and becaues of a previously-broken hip, tend to change sleeping positions frequently.

3) I'm on Medicare through the Humana Gold Choice program. How do they determine what they'll allow on a given machine? Is it a fixed amount for all machines, a percentage of a machine's wholesale cost, or some arcane formula only a government bureaucrat could come up with?

I plan to start out through a provider to "learn the ropes" and eventually become as independent of them as is practical, at least for hardware. I'm proficient (but not geeky) on a computer, so would like the ability to monitor my own parameters via software.

FWIW Dept: I'm retired and indulge in "Ham" radio, horses (dressage), shooting, astronomy, & woodworking.

Thanks in advance for all replies.

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): respironics, resmed, nasal pillow, medicare, auto

Last edited by CUatX on Thu May 22, 2008 6:43 am, edited 1 time in total.
Analog guy in a digital world.

User avatar
ColinP
Posts: 349
Joined: Wed Nov 21, 2007 7:26 am
Location: South Africa

Post by ColinP » Thu May 22, 2008 6:42 am

Hi there CUatX, and welcome.

Sorry I can't answer any of your supplier/insurance questions.

You and I share one or two hobbies it seems - ham radio (although I'm not active at the moment, I still have my license) and woodworking.

Colin

Claire
Posts: 125
Joined: Sun Feb 24, 2008 11:04 am
Location: Ottawa, Ontario

Post by Claire » Thu May 22, 2008 7:23 am

Hi, and welcome to the forum. I have the Resmed S8Elite for 6 months and it's worked very well for me. I also traipsed it from Canada to US to Egypt and back and had no problems anywhere. It has a built-in converter so all I needed was a different plug (this is likely true of other machines, I suspect).

Anyway, one thing I like about it particularly is the LED display. You can see your nightly results through it using the Clinician's Menu. If you decide to get this machine, ask on the forum how to access this menu and find your results.


Pineapple
Posts: 345
Joined: Fri Feb 29, 2008 11:20 am

Post by Pineapple » Thu May 22, 2008 8:24 am

Frank,

As a nearly newbie who is having therapy problems, definatly get a "fully data capable". Even if you weren't interested in tracking your own progress (which you stated you are), if you have a problem later, it helps identify it.

The Elite is fully data capable, I don't think the DeVilbiss IntelliPap is. If I'm wrong, someone will correct me.

Good Luck.


bap40
Posts: 879
Joined: Wed Feb 13, 2008 8:43 am
Location: North Dakota

Post by bap40 » Thu May 22, 2008 8:44 am

Welcome to this great forum.

Iv'e only been on therapy since Feb, but have learned so much from this forum, including the fact that we all NEED to have a data-capable machine. Data-capable does not mean COMPLIANCE data either as some DME' will tell you.

Unfortunetly for me, I did not learn that until after I was given a F/P machine. No F/P is data capable by the way. The data provided via capable machines is invaluable. You can literally monitor your own therapy. These machines provide info on mask leaks, AI's, HI's, snores, and more. This way you can tweak anything that needs fixed versus no clue on a basic machine.

I ended up jumping hoops to get my current machine, including firing my original DME because she would not give me what I wanted, after I did research and had lots of info given to me from this board. Before I fired the "bad lady" DME, I got my own GP to write a prescription for the exact machine I wanted and took it to another DME and was given that machine with no problems.

So do your research and get the machine you want the first time around. It will save you from a lot of BS down the line.

Thank goodness you landed here before you got started. Read the info under the yellow lightbulb to have more facts before you decide on a machine and mask. Mask fitting is really the hardest part of this therapy. There are so many mask's out there and sometimes you have to try ton's before you find one that fits and doesn't leak. The leak is recorded on data machines so you KNOW if a mask is leaking during the night versus not having a clue with a non data machine.

Good luck and keep us posted.[/i]

Brooke

CUatX
Posts: 59
Joined: Thu May 22, 2008 5:46 am
Location: NE TN

Post by CUatX » Thu May 22, 2008 12:22 pm

Thanks for the info so far, folks!

I've spent the morning chasing around looking at various machines and settled on the Resmed S8/3i combo, either Elite or Vantage model. We'll also give the F&K Opus mask a test-run. The DME's RT says their billing is the same for the two machines. She's very willing to work with me as far as data acquisition & analysis, etc., something the others were either very reluctant or flat-out unwilling to do and thus immediately pulled from the starting gate.

Something I learned a long time ago: Whenever anyone gets very protective of information, chances are their job can be learned in a very short period of time and mastered with nominal effort. In this case, lawyer-phobia probably enters into the equation!

Analog guy in a digital world.

webgrafix
Posts: 6
Joined: Mon May 19, 2008 1:34 pm

Post by webgrafix » Thu May 22, 2008 1:14 pm

Frank...
Welcome!

You are not the only "newbie" here. I have been on CPAP for 1 week and a day.

Last night was my first FULL not off sleep since being on this therapy... and using my ResMed S8, I am able to see my "numbers" right from the screen, as I don't have the software yet. My AHI (number of episodes avg per hour) was done to only 5 from 54!

So there is hope.

I love my machine so far.... but it's the only one I used (obviously). It's got all the bells and whistles... but over all very easy to use. It's also very quiet... my wife LOVES the "white noise" as it helps her to fall asleep, and no snoring!

Anyways... welcome!


User avatar
birdshell
Posts: 1615
Joined: Sun Mar 26, 2006 11:58 am
Location: Southeast Michigan (Lower Peninsula)

Post by birdshell » Thu May 22, 2008 2:10 pm

CUatX wrote:<snip>
The DME's RT says their billing is the same for the two machines. She's very willing to work with me as far as data acquisition & analysis, etc., something the others were either very reluctant or flat-out unwilling to do and thus immediately pulled from the starting gate.
You are a very fortunate patient as this is not the normal story heard about DME providers. There are a few good ones out there!

CUatX wrote: I learned a long time ago: Whenever anyone gets very protective of information, chances are their job can be learned in a very short period of time and mastered with nominal effort. In this case, lawyer-phobia probably enters into the equation!


That is a VERY wise observation, and gave me a good laugh, to boot. How very true lawyer phobia must be!


You are off to a wonderful start, and keep up the great work. There are many great machines out there, and I have had very good service from my ResMed S8 Compact...but it does nothing except count the hours and days used, plus blow.

Rest well, and breathe easy very, very soon.

Karen


Be kinder than necessary; everyone you meet is fighting some kind of battle.

Click => Free Mammograms

User avatar
sleeplessinaz
Posts: 1067
Joined: Mon Oct 29, 2007 10:49 am
Location: Mesa, Arizona

Post by sleeplessinaz » Fri May 23, 2008 12:06 pm

Hi There---I am fairly new too--am on my second machine though since my ResMed Escape was NOT data capable. I did not do my homework ahead of time like you are doing--good for you!! Lucky for me we switched insurnance companys so I got a new machine script from my Dr.

I just LOVE, LOVE using my ResMed S8 ELITE, I am able to see my "numbers" right from the screen, as I don't have the software yet. It is cool to see how different types of masks will alter your numbers a bit.

I love my machine so far.... it is so much better than the Escape. It's got all the bells and whistles... but over all very easy to use. It's also very quiet... my husband LOVES the "white noise" as it helps him to fall asleep, and I do not snore anymore--so that is a bonus. Good luck with your machine choice--:). the mask I have now is the OPTI LIfe Nasal pillow system ---I am having a hard time with the prongs goin inside my nares so I called Apria today and they are sendine me a ComfortLite 2 with the direct seal cushion--I guess I will see how that goes.

I have about 4 masks now in the linen closet and I keep stack them up in the DUD pile if they do not work for me. The OLD STAND BY is the F & P Flexifit 407--love it alot and the Comfort Gel Petite one.

You are on your way!!!!

Carrie

Start Date 08/30/07
APAP setting is 6 to 12
HH 2.5
Side Sleeper
HypoThyroidism & Diabetes
New Airsense autoset 12/08/14

splinky
Posts: 30
Joined: Mon Aug 25, 2008 8:44 pm

Re: Newbie to CPAP w/ Questions

Post by splinky » Fri Oct 03, 2008 10:12 pm

Hi. I'm new to all this and so glad to have found this resource. I'm trying to figure out which equipment will work best for me. I'm several weeks into treatment and using the ResMed Elite II w/ humidifer and the Respironics Opti-Life Pillows. I switched this week from the Respironics Comfort Gel Nasal Mask. I like the pillows much more mainly because I can wear my glasses with it and nothing is pressing into my face. Was curious about settings on the machine and if when switching from a mask to the pillows are there any settings that I need to change? What do people do about dry nasal passages and nose bleeds? Is saline gel any help with those things? Thanks so much in advance for any advice you all can offer.

Guest

Re: Newbie to CPAP w/ Questions

Post by Guest » Fri Oct 03, 2008 10:36 pm

Dear All,

I've been using a ResMed S8 Escape with heated humidification for 5 months, which is what the Respiratory Thearapist gave me. I have researched other machines including the S8 Elite, Bipap, and Apap. I think that this is the right machine for me as the other machines have decreased pressure on expiration and I have read that by maintaining pressure on expiration that this machine assists the heart in pumping.

I also have a heart issue, which most undiagnosed sleep apnea users have. In the five months of machine usage I have noticed my blood pressure normalizing, and my irregular heart beats becoming regular. Also, I no longer wake up at night unless I have to go to the bathroom. In addition, my finger nails are stronger. and the mental clearity is very noticable. This treatment is a miracle!!!