The Hybrid Pinch

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
BP
Posts: 199
Joined: Fri Aug 19, 2005 4:09 pm
Location: Atlanta, GA

The Hybrid Pinch

Post by BP » Tue Apr 08, 2008 11:31 am

I have been using a Hybrid mask for about 4 months now. I really like not having to wear a chinstrap anymore, and it seals really well most nights.

Unfortunately, I have on irritating problem with the Hybrid. I had to remove the chin cup on mine to get it to seal correctly. The problem is that the top part of the oral part pinches the skin just below my nose and unfortunately hasn't really gotten much better even after all this time. I have tried to move it down a bit so it doesn't pinch as much, but that causes the nasal pillows to not seal well.

Has anyone else experienced this problem, and were you able to solve it.

Thanks,
BP


User avatar
pjwalman
Posts: 444
Joined: Sun Apr 06, 2008 3:34 pm

Post by pjwalman » Tue Apr 15, 2008 11:56 am

Dang, I was hoping there would be an answer to this!!! I just tried mine for the first time last night, had a helluva time getting a seal in the first place, and then woke up at 1 a.m. having bumped something out of place which I couldn't figure out how to fix and just gave up on it. Have you, since posting this thread topic, gotten any advice on how to get rid of that pinch or figured out any tricks?

Peggy


User avatar
BP
Posts: 199
Joined: Fri Aug 19, 2005 4:09 pm
Location: Atlanta, GA

Post by BP » Thu Apr 17, 2008 8:42 am

Peggy, no, no one has any advice on this subject. I do find it's less of a problem if I shave each night, but that's a pain so it doesn't always happen. Other than that the Hybrid is great, much better than any of the other alternatives like chin straps and taping.

Cheers...

User avatar
pjwalman
Posts: 444
Joined: Sun Apr 06, 2008 3:34 pm

Post by pjwalman » Thu Apr 17, 2008 8:53 am

BP, I don't know if any of these will help with the pinch problem, but I did stumble on this link yesterday about Hybrid tips in another thread and wanted to pass it along to you.

Peggy

viewtopic.php?p=91423

neverbetter
Posts: 712
Joined: Thu Dec 29, 2005 5:44 pm
Location: NY, Miami, London

Post by neverbetter » Thu Apr 17, 2008 10:55 am

pinching is a bit new to me but that pad a cheek or somekind of pad on the headgear may help you.

The great thing about the Hybrid is you can cut the cushion anywhere, not just the chin flap. you get 3 cushions. take advantage of that and taylor them to your face.
I can use all three cushions with a little adjustment. best darn thing I've found. Play with it. They sure give you enough to play with!

User avatar
roster
Posts: 8153
Joined: Wed Jan 18, 2006 8:02 pm
Location: Chapel Hill, NC

Re: The Hybrid Pinch

Post by roster » Thu Apr 17, 2008 6:34 pm

BP wrote:I have been using a Hybrid mask for about 4 months now. I really like not having to wear a chinstrap anymore, and it seals really well most nights.

Unfortunately, I have on irritating problem with the Hybrid. I had to remove the chin cup on mine to get it to seal correctly. The problem is that the top part of the oral part pinches the skin just below my nose and unfortunately hasn't really gotten much better even after all this time. I have tried to move it down a bit so it doesn't pinch as much, but that causes the nasal pillows to not seal well.

Has anyone else experienced this problem, and were you able to solve it.

Thanks,
BP
You may have the straps too tight. Please read this: viewtopic.php?t=14422

Don't miss the part about "I took a leg out of a lady's pair of tights and tied it in a circle." This trick of Rested Gal's has allowed me to adjust the mask straps quite loosely and still get a very low leak rate.


User avatar
BP
Posts: 199
Joined: Fri Aug 19, 2005 4:09 pm
Location: Atlanta, GA

Post by BP » Mon Apr 21, 2008 3:37 pm

neverbetter, can you give examples of what you meant about cutting the cushions anywhere?

neverbetter
Posts: 712
Joined: Thu Dec 29, 2005 5:44 pm
Location: NY, Miami, London

Post by neverbetter » Tue Apr 22, 2008 12:40 pm

Most people know you can take regular scissors and cut the chin flap off. You can also cut the cushion on the sides or on the upper lip, where ever you need a little extra room.You can tailor the Hybrid to fit your face.
The best thing to do is practice on one of the cushions that is not your favorite size. That way, should you give yourself too much room and not like it, you have an idea what not to do on the next cushion. You get three.

User avatar
DreamStalker
Posts: 7503
Joined: Mon Aug 07, 2006 9:58 am
Location: Nowhere & Everywhere At Once

Post by DreamStalker » Tue Apr 22, 2008 12:46 pm

BP wrote:neverbetter, can you give examples of what you meant about cutting the cushions anywhere?
The oral cushion slips into a slot on the mask shell. Neverbetter is suggesting you trim that part of the cushion that slips into the slot in the shell to custom fit the cusion to the shape of your upper lip area.
President-pretender, J. Biden, said "the DNC has built the largest voter fraud organization in US history". Too bad they didn’t build the smartest voter fraud organization and got caught.

neverbetter
Posts: 712
Joined: Thu Dec 29, 2005 5:44 pm
Location: NY, Miami, London

Post by neverbetter » Wed Apr 23, 2008 11:31 am

Correct.
You can trim the mask anywhere. the sides, bottom, top, everyewhere. I wasn't the first figure this out. I found out about cutting it online over a year ago. with three cushions to play with, there is no way this mask won't fit.
Pull the darn thing out of the mask drawer and try it for yourself. I think the manufacturers knew we would do this because even after you cut it, you can slide it into the frame, no problem.

I trim the end that inserts into the mask to shorten an area to contour to my face. It will slide in and be shorter in some places, longer in others. I like to give myself more roon on the upper lip area because of my facial hair.

Guest

Post by Guest » Wed Apr 23, 2008 3:43 pm

I get it.
Now, I get it. I wasn't following. I could have tried this months ago.
Can't wait to try it. Glad I never traded my Hybrid.

Thanks.

Guest

Post by Guest » Wed Apr 23, 2008 3:51 pm

I've cut one and trying to do a picture for you, but it wont work.
Sorry i wasn't clear.

It's the rim
The inside rim I trimmed.

I have my small one with step one if it works this time.

one more time....



neverbetter

neverbetter
Posts: 712
Joined: Thu Dec 29, 2005 5:44 pm
Location: NY, Miami, London

Post by neverbetter » Wed Apr 23, 2008 3:54 pm

It isn't working. I'll post the photo on a link and be back.
[

dsmith72
Posts: 3
Joined: Sat Nov 10, 2007 6:48 am

Hybrid Pinch

Post by dsmith72 » Wed Apr 23, 2008 11:28 pm

Has anyone else tried the Resmed Liberty as an alternative to tyhe Hybrid? I have not experienced any of the problems described here w/ the Liberty - it seems to be a better product than the Hybrid.


Issac
Posts: 284
Joined: Mon Jun 05, 2006 5:53 pm

Post by Issac » Thu Apr 24, 2008 8:37 am

Neverbetter,
It does work, but it is not quite as easy as you make it sound.
I highly suggest that a marker is used to outline where the cuts need to be made before you cut.
The hybrid just gives you more options because you have three cushions to play with and that makes the product substantially more forgiving than a liberty,per se.
Unless someone has a great deal of facial hair or a very big upper lip area, there is no reason to start cutting or tailoring the hybrid cushions.

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Additional Comments: Puresom Ruby Adjustable Chinstrap, upgrading all in July