I am a mouth leaker not breather
I am a mouth leaker not breather
.
Last edited by blowfish on Sun Nov 02, 2008 11:21 pm, edited 1 time in total.
You need to either use a full face mask or tape your mouth shut. I tape every night. Works great for me.
Brenda
Brenda
_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Love my papillow, Aussie heated hose and PAD-A-CHEEKS! Also use Optilife, UMFF(with PADACHEEK gasket), and Headrest masks Pressure; 10.5 |
-
- Posts: 330
- Joined: Sat Jan 13, 2007 5:25 pm
- Location: Seattle, WA
Re: I am a mouth leaker not breather
If you are having big and large leaks, your machine isn't going to record "events" so your software shows a low AHI and large leaks all night and your real AHI might be astronomical.mth712 wrote:... although my AHI is below 5 all the time.
-
- Posts: 330
- Joined: Sat Jan 13, 2007 5:25 pm
- Location: Seattle, WA
Nope and nope. I start off with it closed and breathing through my nose. At some point I may open my mouth and breathe through it. Sometimes I do wake up with my mouth open but I'm breathing through my nose - that really dries out my mouth. It's not common, though.mth712 wrote:Does your mouth just hang open with the full face mask? Do your lipd flap?
I never have a problem with my lips flapping. I don't know if they could with a FF mask.
I completely understand not wanting to tape. I was reluctant to try it in the first place - it seemed a bit dangerous. However, I did try the tape so I could use a nasal-only mask. But, it seemed my mouth really wanted to be open because when I woke up there was a nice rip straight across the center.
While a lot of people prefer to tape or train themselves to keep their mouths closed so they can use nasal-only masks, I prefer to simply use a FF mask. It works for me and it might work for you as well. I posted a lot of information about what I know about the FF masks on a different forum. You might want to start there to get the list of FF masks available and a little info about them. Then, you can search here for specific feedback about the masks that inerest you http://www.apneasupport.org/viewtopic.php?t=10089
don't tell DSM but I have taken mine apart and put it back together and it does work
noisy yes and I used it one night with a standard computer power cord
only thing I wonder about it is what is the use for the ethernet port in the top of the tower. what data is stored to be transmitted? it has to be set with a manometer
noisy yes and I used it one night with a standard computer power cord
only thing I wonder about it is what is the use for the ethernet port in the top of the tower. what data is stored to be transmitted? it has to be set with a manometer