Encore Pro analyzer question

wolftracker · Post by **wolftracker** » Thu Apr 12, 2007 3:24 pm

hi all,

i have vista
i have the new encore pro 1.8

it seems to be working fine...
card reader reads
data loads.

the problem i seem to be having is that encore pro analyzer
keeps giving me an error message

CANNOT open database "EncorePro" requested by the login. The
login failed.

Login failed for user 'WolfTracker-PC\WolfTracker'

Any one else having this type or problem that might be able
to give me an idea of what to look for.

Thanks

To the best of my knowledge, I did not set up a name for the
database. It appears to have taken off the laptop itself.
The data remains on the smart card.

I am just not sure where to go.

Linda3032 · Post by **Linda3032** » Thu Apr 12, 2007 3:32 pm

I'm sure somebody can help you. Can you get into MyEncore reports?

wolftracker · Post by **wolftracker** » Thu Apr 12, 2007 4:41 pm

does not seem to work either....
it is looking for 1.5

i have 1.8

dont see a way to change to a different version

nice thought though

never thought of that

Linda3032 · Post by **Linda3032** » Thu Apr 12, 2007 4:50 pm

Well, MyEncore 1.5b.7 worked with Pro 1.6, so I wonder why it won't work with 1.8

Can you remove the MyEncore program and reinstall it to see if it will work? (keeping in mind that I'm not computer literate). ....

wolftracker · Post by **wolftracker** » Thu Apr 12, 2007 5:12 pm

says cannot located encore pro 1.5
so unless there is something to change what it is looking for

i tried twice and it did no good.

cflame1 · Post by **cflame1** » Fri Apr 13, 2007 5:34 am

Hopefully if nothing else James will see this thread and respond... or somebody else that has Vista with Encore Pro/EPA working

Guest · Post by **Guest** » Fri Apr 13, 2007 6:16 am

The myencore only worked partially with 1.6, some of the charts it generated were missing. James Skinner's version allowed for all of the charts to show up. I think it had something to do with a different named file or database in 1.6 versus 1.5, but he would be much better at explaining than I.

TM

Guest · Post by **Guest** » Fri Apr 13, 2007 6:29 am

I believe your problem is you are running Vista and if I understand many programs that ran and run fine in previous OS (ie XP) do not in Vista as MS changed a way it handles some internal routines .. Anyway, that is my guess but James will no doubt know it that is happening. Note Encore 1.8 big change is it works with Vista. I am guessing James will have to do something to his great program. I really enjoy his program makes reading (understanding) Encore sooo much easier..

Good luck

ddpelp · Post by **ddpelp** » Fri Apr 13, 2007 6:30 am

sheetzzz did not login prior to the above post.. Sorry

wolftracker · Post by **wolftracker** » Sat Apr 14, 2007 6:08 am

Has anyone else with 1.8 had this problem.
Jim does not have the software and said to
post and see if anyone else has had this problem.

Wolf

leonardlake · Post by **leonardlake** » Sat Apr 14, 2007 8:58 am

I just received my V1.8 and installed it on Windows XP. It read my data just fine for last night and Encore Pro Analyzer added all the information to its graphs.

Leonard

wolftracker · Post by **wolftracker** » Sat Apr 14, 2007 12:03 pm

any one else using 1.8 and vista ..
been able to get epa to work with encore??

SelfSeeker · Post by **SelfSeeker** » Sat Apr 14, 2007 12:23 pm

If I remember correctly, the bigger issue was with the M series did not work as well with MyEncore. I think the classic remstar did not have issues.

Anonymous wrote:The myencore only worked partially with 1.6, some of the charts it generated were missing. James Skinner's version allowed for all of the charts to show up. I think it had something to do with a different named file or database in 1.6 versus 1.5, but he would be much better at explaining than I.

TM

jskinner · Post by **jskinner** » Sat Apr 14, 2007 1:56 pm

Linda3032 wrote:Well, MyEncore 1.5b.7 worked with Pro 1.6, so I wonder why it won't work with 1.8

MyEncore didn't work at all with 1.7 so I don't expect it will work with 1.8 either.

cflame1 wrote:Hopefully if nothing else James will see this thread and respond... or somebody else that has Vista with Encore Pro/EPA working

I'm using Vista but I don't have 1.8 so its hard for me to trouble shoot this issue. Vista tightened up the security and 1.8 uses a newer version of the SQL database engine so I suspect its something to do with that.

ddpelp wrote:I believe your problem is you are running Vista and if I understand many programs that ran and run fine in previous OS (ie XP) do not in Vista as MS changed a way it handles some internal routines .. Anyway, that is my guess but James will no doubt know it that is happening. Note Encore 1.8 big change is it works with Vista. I am guessing James will have to do something to his great program.

EPA works fine on Vista with 1.7. I'm pretty sure some people have EPA working with 1.8 on XP. I'm just not certain if anyone has both Vista and 1.8 working with EPA?

SelfSeeker · Post by **SelfSeeker** » Sat Apr 14, 2007 2:11 pm

More Vista questions:

Does Encore Pro 1.6.22 work with Vista?

Does the current EPA work on Vista?

Anything I need to know when loading Encore or EPA on Vista?

Are the upgrades/revision of Encore Pro 1.7 or 1.8 available to people who currently have earlier versions?

Encore Pro analyzer question

Encore Pro analyzer question

myencore

the error message

Any one else having this problem

V1.8 and Encore Pro Analyzer

1.8 and vista

Mask

Additional Comments: Encore Pro 1.8