AHI meaning on M series LCD screen

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
ddpelp
Posts: 237
Joined: Tue Mar 27, 2007 10:16 pm

AHI meaning on M series LCD screen

Post by ddpelp » Mon Apr 09, 2007 8:56 am

Question on the meaning of the AHI screen on the LCD of my Respironics M series auto CPAP. When it shows AHI = 3.3 does that mean I had 3.3 or the machine reacted to 3.3 or I just had 3.3 that were NOT treated with increased pressure? Thanks I know this is an average and have read the LCD info is not very accurate but would like to know what it is trying to say thanks

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): auto cpap, respironics, AHI


_________________
Mask
Additional Comments: Encore Pro 1.8

SelfSeeker
Posts: 779
Joined: Tue Sep 19, 2006 6:25 pm

Post by SelfSeeker » Mon Apr 09, 2007 9:09 am

It means that you had 3.3 averaged during the night.

Could be both hyponeas and apneas.

I would assume the machine reacts to all it sees.

If not corrected it would show up as NR on the data. ( Non responsive)
I can do this, I will do this.

My disclaimer: I'm not a doctor, nor have I ever worked in the health care field Just my personal opinions.

User avatar
ddpelp
Posts: 237
Joined: Tue Mar 27, 2007 10:16 pm

selfseeker thanks

Post by ddpelp » Mon Apr 09, 2007 9:16 am

I was not sure. I had hoped it meant that the machine reacted to apneas. I am guessing the 3.3 is average during the full session?

I am testing two mask sizes from my doctor a medium and a large please read this question as I have updated that info a little thanks

viewtopic/t18917/STILL-trying-to-make-s ... -size.html

_________________
Mask
Additional Comments: Encore Pro 1.8

ABC
Posts: 27
Joined: Wed Mar 21, 2007 8:37 am
Location: Pennsylvania

Don't Understand

Post by ABC » Mon Apr 09, 2007 4:57 pm

I am trying to understand what I just read in these posts. Lower AHI's are good but if the machine responds to all of them, and does not say non-Responsive isn't the problem being treated?

Will a higher AHI number mean that you feel worse that day or not?

I have not gotten lower than 8.8 and had 20 last night on an M-Series. I don't want to worry about things that are being treated.

I am a Mac user, non intel, and can't use the software. I do log the daily statistics.

apneaicinisrael
Posts: 142
Joined: Tue Jan 31, 2006 6:41 am

Post by apneaicinisrael » Tue Apr 10, 2007 9:23 am

Hi All,

If I have a straight CPAP machine (which it happens I do), how would "the machine react" - how can it correct when it is at a set pressure? On an APAP I can understand this, as the machine can vary its pressure when needed.

Bottom line - I figure that with my straight CPAP, the AHI I see on the software are the "ones that got away", true apneas ("A") and almost apneas ("H") or hypopneas. And there would be no such thing as a NR on a straight CPAP.

Is this accurate?

It is very confusing - on an APAP, if the event registers as an Apnea or a Hypopnea - isn't that a NR??

Help out there!

thanks...
AII