Evora Full Face masks

[joshdog]

My questions are has anyone else used the Evora FFM with a ResMed AirCurve V10 Auto and what does your report show for leakage. I had high leakage (25 to 70 CmH2O). ResMed AirCurves consider above 25 CmH2O leakage high. I was getting 20 to 40 CmH2O leakage with a DreamWear nasal mask . For information I have changed masks, watertank and heated hose, for me high leakage in normal and made no difference.

Thanks
Joshdog

[LSAT]

I use the F&P Vitera FF mask and my leakage is rarely 0ver 2. Do you feel leaks while wearing the mask? Is your hose fitting tight to the mask?

[ChicagoGranny]

Evora FFM

Find this mask on YouTube and carefully watch some videos about fitting and adjusting.

[mets123]

I use the Evora full face about twice a week. I have virtually no leaks with this mask. The only problem is I have to remove it at times because I feel heat around the cushion area even though I use no humidity and cool tube temperatures.
This mask for me is loose with the top straps and slightly tighter on lower straps.

[joshdog]

I did not find any mask leaks, but the air being exhausted through the mask vent holes is a lot. I think that is good but my ResMed machin does not like it.

[Okie bipap]

I have been using the Evora since shortly after it came out. I haven't checked Oscar lately, but my machine shows the excess leakage is within limits.

[ChicagoGranny]

I did not find any mask leaks, but the air being exhausted through the mask vent holes is a lot. I think that is good but my ResMed machin does not like it.

The mask and machine have been designed to be compatible with each other.