Water chamber

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Juggsy75
Posts: 70
Joined: Sat May 23, 2020 11:48 am

Water chamber

Post by Juggsy75 » Mon May 01, 2023 5:41 am

Hey guys so I’m based in uk, been using cpap for about 6 years with good results, average ahi is around 0.5-1… recently was given a dream station to replace my old system one machine due to the recall,

All is fine, then at my last appointment I queried a water chamber for it and was given one, no instructions other than don’t fill above maximum, so I’ve noticed that in the morning the water level in the chamber dosent move at all, I’ve tried turning the heater up on machine but that just causes water in my tube and gurgling noises in night. Any help much appreciated

_________________
Mask
Additional Comments: Philips Remstar pro flex+ system one 461p

RNeil
Posts: 56
Joined: Tue Jul 31, 2018 7:58 am
Contact:

Re: Water chamber

Post by RNeil » Wed May 03, 2023 4:18 pm

The humidifier must be working because that's where the water in the tube is coming from. You can prevent condensation in the tube by using a hose cover, or a heated tube, or turning down the humidity (water heater).