New ResMed Airsense 11

[ErnieH]

Will you be able to use an sd card with the new 11?

Thanks

[Pugsy]

Yes. Most definitely. There is a slot for the SD card but the machines no longer come with a SD card in the slot.
You will have to get your own. No big deal. Any generic SD card will work. I wouldn't get anything larger than 32 GB though.
You won't ever need that large amount of storage and just a waster of extra money.
8 or 16 GB is going to be plenty but the smaller capacity SD cards are getting scarce and when found sometimes costs more than a larger SD card.

If you want to request the clinical/provider manual so you can see where the SD card slot is and also get all the other information..
You can get it here.
https://www.apneaboard.com/adjust-cpap- ... tup-manual

[ErnieH]

Pugsy,
Thanks for the information. I'll just take my card out of the old machine and delete and reformat it.

Thanks again,
Ernie

[Pugsy]

Most likely all you need to do is manually delete the files on the old SD card.
No need to go through the work of reformatting...the machine will likely take care of it for you when you insert it in the new machine.
That's all I have ever done....I manually delete the files/folders and then I put the SD card in the machine and it does its thing...and that's all that needs to be done.

[southerndoc]

Pugsy,
Thanks for the information. I'll just take my card out of the old machine and delete and reformat it.

Thanks again,
Ernie

There is an erase/format option on the AS11 itself. I would suggest using that.

[Respirator99]

There is an erase/format option on the AS11 itself. I would suggest using that.

SouthernDoc, looking at the clinical manual, the only erase function I can see deletes all data on the SD card AND in the machine. Is there a separate option to just erase / format the card (only)?

[southerndoc]

There is an erase/format option on the AS11 itself. I would suggest using that.

SouthernDoc, looking at the clinical manual, the only erase function I can see deletes all data on the SD card AND in the machine. Is there a separate option to just erase / format the card (only)?

It's a new machine, isn't it? What data is going to be erased if you haven't used it much? I formatted a card with it after using it a day or two. I didn't care that the data was erased from the machine.