Don’t have to stick with the same manufacturer, do I
-
- Posts: 19
- Joined: Thu May 06, 2021 5:07 pm
Don’t have to stick with the same manufacturer, do I
Can I use F20 or F30 with Dreamstation, or Dreamwear with Airsense 10?
- chunkyfrog
- Posts: 34428
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nebraska--I am sworn to keep the secret of this paradise.
Re: Don’t have to stick with the same manufacturer, do I
Unless you have certain tiny travel machines, any mask will work with any machine.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: Don’t have to stick with the same manufacturer, do I
I use ResMead and DreamWear masks with my ResMen Airsense 10 machine.
My wife uses Fisher & Paykel with her DreamMachine.
Short answer, no problems.
My wife uses Fisher & Paykel with her DreamMachine.
Short answer, no problems.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
ResMed AirSense 10 Autoset with built in humidifier
Resmed P10 pillow mask
Resmed P10 pillow mask
Re: Don’t have to stick with the same manufacturer, do I
I’ve used both the ResMed F20 and F30 with the Philips DreamStation machine, they both work just fine. The connector hose cuff that couples the ResMed mask elbow to the Philips hose is universal.
ResMed AirSense 10 Autoset
ResMed AirFit F30 full face mask
ResMed AirFit F30 full face mask
Re: Don’t have to stick with the same manufacturer, do I
Try different ones until you find the one you like. I use a Philips Dreamwear nasal and a Bleep with my Air Curve 10. None of the ResMed masks I tried worked for me. If insurance is picking up the tab, contact your DME and they will know when you can get new equipment covered.
_________________
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: Machine is a ResMed Aircurve 10 ASV |