Equipment Tampering

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User691510
Posts: 1
Joined: Sun Apr 25, 2021 4:09 am

Equipment Tampering

Post by User691510 » Sun Apr 25, 2021 4:19 am

Multiple times after Midnight pm central time just recently three days I wear CPAP for 1.3 hours then suddenly highest air pressure mass runs and someone's changing remotely my settings.
My equipment is from Regions Hospital and they're refusing to assist with issue.
What should I do since I have no control over a remote device CPAP?
So much pressure going in face mask while seal is tight flush mount to skin with extreme high pressure almost made me stop breathing.
Should I call the police?

User avatar
Dog Slobber
Posts: 4231
Joined: Thu Feb 15, 2018 2:05 pm
Location: Ontario, Canada

Re: Equipment Tampering

Post by Dog Slobber » Sun Apr 25, 2021 7:17 am

Post a graph, this will include your settings.

Then, *if* somebody is tampering with your settings, we will see a change in your settings.

Sometimes, as part of the titratration process, settings are changed, but this should be done with the patients knowledge. I doubt somebody is just arbitrarily messing with your machine.
Battery Backup: EcoFlow Delta 2

User avatar
Julie
Posts: 20056
Joined: Tue Feb 28, 2006 12:58 pm

Re: Equipment Tampering

Post by Julie » Sun Apr 25, 2021 7:51 am

Regions Hospital?

Are we supposed to guess what country that's in?

Seriously.

User avatar
chunkyfrog
Posts: 34545
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: Equipment Tampering

Post by chunkyfrog » Sun Apr 25, 2021 8:11 am

Where are you? (Minneapolis, Minnesota?)
What brand/model machine is it?
Nobody is screwing with your machine.
We can help you figure it out.
Please calm down.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

User avatar
Miss Emerita
Posts: 3747
Joined: Sun Nov 04, 2018 8:07 pm

Re: Equipment Tampering

Post by Miss Emerita » Sun Apr 25, 2021 11:32 am

For now, maybe try turning on Airplane Mode.
Oscar software is available at https://www.sleepfiles.com/OSCAR/

User avatar
LSAT
Posts: 13345
Joined: Sun Nov 16, 2008 10:11 am
Location: SE Wisconsin

Re: Equipment Tampering

Post by LSAT » Sun Apr 25, 2021 12:14 pm

I doubt that someone is sitting around at midnight playing games with your machine. I assume you have an autoset and are a new user.

SDBud
Posts: 266
Joined: Thu Jan 03, 2019 3:24 pm
Location: Sunny SoCal

Re: Equipment Tampering

Post by SDBud » Sun Apr 25, 2021 1:46 pm

Miss Emerita wrote:
Sun Apr 25, 2021 11:32 am
For now, maybe try turning on Airplane Mode.
Exactly. If that fixes things, then it's possible someone has hacked that machine (unlikely, BUT possible).

If that DOESN'T fix it, then mental health care seems necessary.
Airsense 10 Autoset
AirTouch and AirFit F10 masks
:roll:

User avatar
Dog Slobber
Posts: 4231
Joined: Thu Feb 15, 2018 2:05 pm
Location: Ontario, Canada

Re: Equipment Tampering

Post by Dog Slobber » Sun Apr 25, 2021 2:07 pm

SDBud wrote:
Sun Apr 25, 2021 1:46 pm

If that fixes things, then it's possible someone has hacked that machine (unlikely, BUT possible).
And how could it be possible that his machine has been hacked?
Battery Backup: EcoFlow Delta 2

User avatar
chunkyfrog
Posts: 34545
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: Equipment Tampering

Post by chunkyfrog » Sun Apr 25, 2021 5:05 pm

SDBud wrote:
Sun Apr 25, 2021 1:46 pm
. . .
mental health care . . .
Did you really say that?
I thought you were better than that.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

User avatar
Pugsy
Posts: 65117
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Equipment Tampering

Post by Pugsy » Sun Apr 25, 2021 5:27 pm

Get the available software and see for sure when the pressure changed and hopefully the machine offers detailed data because there are some very valid (and not illegal) reasons for the machine to be changing pressures all on its own depending on what is going on with your airway.

OSCAR https://www.sleepfiles.com/OSCAR/
http://www.apneaboard.com/wiki/index.ph ... stallation
http://www.apneaboard.com/wiki/index.ph ... rpretation


viewtopic/t158560/How-to-post-images-for-review.html

It would be darn near impossible for someone to be "hacking" the machine in the middle of the night.
Even if the machine supplier is wanting to change the settings they can't do it without a doctor's order and it's not done in the middle of the night when it is done.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
RogerSC
Posts: 1912
Joined: Sat Jul 21, 2012 1:11 pm

Re: Equipment Tampering

Post by RogerSC » Sun Apr 25, 2021 5:56 pm

Seems more likely to me that they've got a "wide-open" pressure range on apap...like 4 - 20cm, and getting wild swings from low to high pressure with detected apneas than having a cpap machine being hacked or tampered with in real time.

User avatar
chunkyfrog
Posts: 34545
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: Equipment Tampering

Post by chunkyfrog » Sun Apr 25, 2021 6:19 pm

Absolutely!
I had runaway pressures when starting out on APAP, but raised the minimum,
while reducing the maximum; and that "taught" it to behave.
Some say it is OK to leave the max at 20--but that did not work for me.
I guess I just breathe weird.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

Janknitz
Posts: 8510
Joined: Sat Mar 20, 2010 1:05 pm
Location: Northern California

Re: Equipment Tampering

Post by Janknitz » Mon Apr 26, 2021 8:12 pm

RogerSC wrote:
Sun Apr 25, 2021 5:56 pm
Seems more likely to me that they've got a "wide-open" pressure range on apap...like 4 - 20cm, and getting wild swings from low to high pressure with detected apneas than having a cpap machine being hacked or tampered with in real time.
THIS.

Image
What you need to know before you meet your DME http://tinyurl.com/2arffqx
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm

User avatar
chunkyfrog
Posts: 34545
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: Equipment Tampering

Post by chunkyfrog » Thu Apr 29, 2021 11:03 am

I notice the OP has only made the ONE post.
Embarrassed?
Or trolling . . .

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

User avatar
zonker
Posts: 11332
Joined: Fri Jun 19, 2015 4:36 pm

Re: Equipment Tampering

Post by zonker » Thu Apr 29, 2021 1:40 pm

chunkyfrog wrote:
Thu Apr 29, 2021 11:03 am
I notice the OP has only made the ONE post.
Embarrassed?
Or trolling . . .
please note that OP hasn't even logged in since question asked.

oh well. perhaps the thread will help another passer by.
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg