AirFit F20 mask killing me
- iLoveMilfs
- Posts: 6
- Joined: Wed Jul 15, 2020 4:15 pm
AirFit F20 mask killing me
I dont believe the co2 holes are getting it out properly. I wake up dizzy and cant even walk after using this mask. Its a terrible design. Curse whoever designed this mask
Is there a way i can modify it and poke some holes in the front? Or should i just get a different mask?
Is there a way i can modify it and poke some holes in the front? Or should i just get a different mask?
Re: AirFit F20 mask killing me
There are plenty of holes. The elbow was just redesigned because people were complaining about the force of air exhaust. The exhaust holes now have a deflector cover over them...Hard to see, but they expel the proper amount of CO2. This is one of the most popular Full Face Masks.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is a new AS10. |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: AirFit F20 mask killing me
Anxiety attack.
Know that the exhaust holes have been carefully designed and thoroughly tested.
Your concerns are groundless.
I hope that helps.
Anxiety sucks. It can make you sick with no physical cause.
If reason does not help, get a different mask.
The mind is a terrible thing to change--gotta live with it however you can.
You are not crazy.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
- iLoveMilfs
- Posts: 6
- Joined: Wed Jul 15, 2020 4:15 pm
Re: AirFit F20 mask killing me
No its carbon dioxode. Not leaving properly due to horrible bad bad design
The mask has caused death in asia, the same company and mask airfit f20. People can have it to a degree and not realize it. It can damage people.
If i drill some holes in the mask in the front, is that a sure way to make sure the carbon dioxide leaves mask?????
The mask has caused death in asia, the same company and mask airfit f20. People can have it to a degree and not realize it. It can damage people.
If i drill some holes in the mask in the front, is that a sure way to make sure the carbon dioxide leaves mask?????
Re: AirFit F20 mask killing me
You don't need our permission...your mask, your life.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is a new AS10. |
Re: AirFit F20 mask killing me
Drill holes in it, at least it is what I would do. You have to convince your self, not us. Like Froggy wrote.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Forma Full Face CPAP Mask with Headgear |
Additional Comments: AirCurve 10 CS PaceWave, Full Mask, sleepyhead, ASV Min EPAP 5 Max IPAP 10.4 PS 0.4-5.4 |
Only ME... -
- Some days sooo slow, some days just running off track ...

- Sheriff Buford
- Posts: 4110
- Joined: Mon Aug 09, 2010 8:01 am
- Location: Kingwood, Texas
Re: AirFit F20 mask killing me
Oh, man.... don't start messing with the vent on ANY mask. Either get a new mask connection (that has the vent) or get a different mask.iLoveMilfs wrote: ↑Thu Jul 16, 2020 4:33 amNo its carbon dioxode. Not leaving properly due to horrible bad bad design
The mask has caused death in asia, the same company and mask airfit f20. People can have it to a degree and not realize it. It can damage people.
If i drill some holes in the mask in the front, is that a sure way to make sure the carbon dioxide leaves mask?????
Sheriff
_________________
Machine: AirSense 11 Autoset |
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Re: AirFit F20 mask killing me
Judging by this post and your chosen profile name.iLoveMilfs wrote: ↑Thu Jul 16, 2020 4:33 amNo its carbon dioxode. Not leaving properly due to horrible bad bad design
The mask has caused death in asia, the same company and mask airfit f20. People can have it to a degree and not realize it. It can damage people.
If i drill some holes in the mask in the front, is that a sure way to make sure the carbon dioxide leaves mask?????
I say Troll.

JPB
By the way you write like a Troll Pugsy has tossed a couple of times.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleep on a Buckwheat Hull Pillow. |
Re: AirFit F20 mask killing me
After I posted, I wondered the same thing Jim.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is a new AS10. |
- iLoveMilfs
- Posts: 6
- Joined: Wed Jul 15, 2020 4:15 pm
Re: AirFit F20 mask killing me
Ok thanks I will just get another mask. ThanksSheriff Buford wrote: ↑Thu Jul 16, 2020 6:16 amOh, man.... don't start messing with the vent on ANY mask. Either get a new mask connection (that has the vent) or get a different mask.iLoveMilfs wrote: ↑Thu Jul 16, 2020 4:33 amNo its carbon dioxode. Not leaving properly due to horrible bad bad design
The mask has caused death in asia, the same company and mask airfit f20. People can have it to a degree and not realize it. It can damage people.
If i drill some holes in the mask in the front, is that a sure way to make sure the carbon dioxide leaves mask?????
Sheriff