Just talked to my DME cause it was time to reorder supplies and he said I could get a new mask every 3 months!!
So I ordered a Hybrid. Thought I would like to try one out. I can always buy a new cushion for my Activa at cpap if the Hybrid doesn't work too well for me. Then in 3 months I can just order new cushions for the Activa from the DME.
Anyway .. is anyone using the Hybrid with the ResMed S8 Elite?
What settings should i use for the leak etc. etc.?
Hybrid and S8 Elite
- Arizona-Willie
- Posts: 703
- Joined: Sun Jul 02, 2006 2:27 pm
- Location: Mesa AZ
Hybrid and S8 Elite
_________________
| Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: Sleepyhead ver 1.0.0 Beta 2 |
- rested gal
- Posts: 12880
- Joined: Thu Sep 09, 2004 10:14 pm
- Location: Tennessee
Actually none of the ResMed mask settings are geared to account for the much, much higher exhaust leak rate that is normal for the Hybrid. Probably doesn't matter much which mask setting you choose, other than if you choose the Full Face setting I believe the ResMed machine acts in a certain way if a FF mask is removed. Standard, Swift, or any of the regular mask settings should work ok as long as you know that the leak rate you're going to see with the Hybrid is going to be higher than usual.
I don't think I'd choose the full face mask setting, even though the Hybrid *is* a FF mask. With the already high built-in leak rate from the Hybrid, if you had significant additional leaks from the pillows or mouth cushion area, that might cause the ResMed machine to think a FF mask had come off, and perhaps stop the treatment until the leak was taken care of. Not sure about that.
Makes me happy to be using Respironics and Puritan Bennett machines that don't require choosing a mask setting at all. I can mix/match machine/mask without having to guess/mess with a "mask setting."
Sorry....couldn't resist adding that. Your machine is fine, Willie. Hope the Hybrid works well for you!
I don't think I'd choose the full face mask setting, even though the Hybrid *is* a FF mask. With the already high built-in leak rate from the Hybrid, if you had significant additional leaks from the pillows or mouth cushion area, that might cause the ResMed machine to think a FF mask had come off, and perhaps stop the treatment until the leak was taken care of. Not sure about that.
Makes me happy to be using Respironics and Puritan Bennett machines that don't require choosing a mask setting at all. I can mix/match machine/mask without having to guess/mess with a "mask setting."
Sorry....couldn't resist adding that. Your machine is fine, Willie. Hope the Hybrid works well for you!
ResMed S9 VPAP Auto (ASV)
Humidifier: Integrated + Climate Control hose
Mask: Aeiomed Headrest (deconstructed, with homemade straps
3M painters tape over mouth
ALL LINKS by rested gal:
viewtopic.php?t=17435
Humidifier: Integrated + Climate Control hose
Mask: Aeiomed Headrest (deconstructed, with homemade straps
3M painters tape over mouth
ALL LINKS by rested gal:
viewtopic.php?t=17435
-
Jimmy_CPAPed_Corn
- Posts: 2
- Joined: Wed Sep 13, 2006 11:40 am
Last edited by Jimmy_CPAPed_Corn on Tue Nov 07, 2006 8:47 am, edited 1 time in total.
- rested gal
- Posts: 12880
- Joined: Thu Sep 09, 2004 10:14 pm
- Location: Tennessee
nonononono..... ....surely not!Jimmy_CPAPed_Corn wrote:HI Laura: I wonder why Resmed even bothered to make the patient chose a mask setting with the S8? Probably an ill-conceived attempt to support their ongoing "Better Together" promotion scheme?
ResMed S9 VPAP Auto (ASV)
Humidifier: Integrated + Climate Control hose
Mask: Aeiomed Headrest (deconstructed, with homemade straps
3M painters tape over mouth
ALL LINKS by rested gal:
viewtopic.php?t=17435
Humidifier: Integrated + Climate Control hose
Mask: Aeiomed Headrest (deconstructed, with homemade straps
3M painters tape over mouth
ALL LINKS by rested gal:
viewtopic.php?t=17435

