Setting up Humidifier (first time) S9 AutoSet

[fdw]

Setting up humidifier for the first time and wanted to get some assistance with the settings.

REMEMBER THIS IS MY FIRST SETUP AND USING ON THE S9 AutoSet

1. How to adjust the amount of humidity I get....I don't want to get flooded or rainout?
2. At what temperature do I set....1 I assume is the lowest and 6 is the highest, don't know?
3. How much water do I add to the reservoir per night?

4. How often do I need to clean the reservoir?

Any tip or tricks??

Thanks a lot

[C/O_Guy]

if its anything like my air sense ten they said clean it every other day and I use a setting of four and still am a little dry in the am but u will want to play with it and find what works for you I have noticed resmed makes there machines pretty user friendly

[Michelle-OH]

I set my temp to 75-76 right now, any hotter and I feel like I'm in a humid rainforest. My tank has a fill line, does yours not have that? I fill it just a little below the line and have never run out of water. My bedroom is probably only about 66-67 degrees. No rainout, but I have a heated tube and cover also.

[ChicagoGranny]

2. At what temperature do I set....1 I assume is the lowest and 6 is the highest, don't know?

Yep. What were you doing before with your older machine? If you don't know what to do now, set it at mid range - 3 or so.

3. How much water do I add to the reservoir per night?

To start, fill it to the max fill line. Later if you find you are not using much water, you can change what you do.

4. How often do I need to clean the reservoir?

Personal preference. If you use distilled water, it should take a very long time to need cleaning.

[palerider]

if its anything like my air sense ten they said clean it every other day and I use a setting of four and still am a little dry in the am but u will want to play with it and find what works for you I have noticed resmed makes there machines pretty user friendly

please stop offering 'advice' until you've learned more.

[palerider]

Setting up humidifier for the first time and wanted to get some assistance with the settings.

REMEMBER THIS IS MY FIRST SETUP AND USING ON THE S9 AutoSet

1. How to adjust the amount of humidity I get....I don't want to get flooded or rainout?

you have to adjust it to whatever amount you need, it's very individual.

higher numbers are more.

[fdw]

I set my temp to 75-76 right now, any hotter and I feel like I'm in a humid rainforest. My tank has a fill line, does yours not have that? I fill it just a little below the line and have never run out of water. My bedroom is probably only about 66-67 degrees. No rainout, but I have a heated tube and cover also.

Great...how to set the temperature?

[ChicagoGranny]

please stop offering 'advice' until you've learned more.

+1

[palerider]

Great...how to set the temperature?

when you attach a climateline (heated) hose, then the menus change, and you can set the hose temp.

[OkyDoky]

I set my temp to 75-76 right now, any hotter and I feel like I'm in a humid rainforest. My tank has a fill line, does yours not have that? I fill it just a little below the line and have never run out of water. My bedroom is probably only about 66-67 degrees. No rainout, but I have a heated tube and cover also.

Great...how to set the temperature?

Sounds like you can use the Clinical Manual. The temps are in centigrade so you might have to do some calculating. http://www.resmed.com/ja-jp/dam/documen ... ow_eng.pdf