Still Not Sleeping Well with My CPAP Device.

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
needsomezzs
Posts: 1
Joined: Thu Oct 29, 2015 6:26 pm
Location: North of Dallas, TX

Still Not Sleeping Well with My CPAP Device.

Post by needsomezzs » Thu Oct 29, 2015 7:07 pm

I began my CPAP journey 23 days ago (Oct. 6) the day I picked up my equipment. My doctor determined that I probably would require a full face mask. I thought I would be measured for a mask and probably receive it in a few days (I thought they were custom made). The tech never measured me just sent me home with the mask she thought I needed. It was so uncomfortable by the 3rd day so I went back and exchanged it for the mask I have now (still not measuring me). Anyway, though it is getting better, the mask still wakes me up a few times every night. It is leaking up by the bridge of my nose and blowing into my eye only on the right side. What am I doing wrong that I am having to get up and readjust several times a night?

_________________
Mask: Simplus Full Face CPAP Mask with Headgear
Additional Comments: My Machine is PR System One REMstar Pro CPAP Machine with C-Flex Plus. No clue about what software I have.

User avatar
Wulfman...
Posts: 6688
Joined: Mon Sep 01, 2014 6:41 pm
Location: Nearest fishing spot

Re: Still Not Sleeping Well with My CPAP Device.

Post by Wulfman... » Thu Oct 29, 2015 7:15 pm

needsomezzs wrote:I began my CPAP journey 23 days ago (Oct. 6) the day I picked up my equipment. My doctor determined that I probably would require a full face mask. I thought I would be measured for a mask and probably receive it in a few days (I thought they were custom made). The tech never measured me just sent me home with the mask she thought I needed. It was so uncomfortable by the 3rd day so I went back and exchanged it for the mask I have now (still not measuring me). Anyway, though it is getting better, the mask still wakes me up a few times every night. It is leaking up by the bridge of my nose and blowing into my eye only on the right side. What am I doing wrong that I am having to get up and readjust several times a night?
With a full face mask, it needs to be properly sized. Then, it needs to be properly adjusted.......not too loose and not too tight. If it's too tight, it'll leak like a sieve. It needs to "float" on the face. The air needs to inflate the cushion which then seals to the facial area.

I'm not familiar with your mask but the above is generally how they need to fit.


Den

.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

gatorback
Posts: 4
Joined: Thu Oct 29, 2015 7:50 pm

Re: Still Not Sleeping Well with My CPAP Device.

Post by gatorback » Thu Oct 29, 2015 8:32 pm

Hang in there: it's worth it. Keep making changes and adjustments until the system is:

1) comfortable
2) effective

Ask for help if help if you can not resolve the problem from your health care professional. It took me a long time, but it was worth it. I started with a full mask and now use a nasal mask. Madness is doing the same thing twice and expecting different results: keep making changes until it works for you.

PoolQ
Posts: 498
Joined: Sat Jul 11, 2015 10:41 am
Location: Silicon Valley

Re: Still Not Sleeping Well with My CPAP Device.

Post by PoolQ » Thu Oct 29, 2015 10:55 pm

I used the Simplus and it leaked in the same place.
Do not over tighten the Simplus and adjust the straps by small (1/8") amounts once you get it close.
Also once you get it on and adjusted try pulling it toward your chin a little to get it to seal better at the top of your nose.
The Simplus is still my backup but now I use the Amara View
Sleeping MUCH better now