Sleepyhead can't find data on my SD card

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
ellen1159
Posts: 235
Joined: Wed Apr 10, 2013 10:59 am
Location: Connecticut Gold Coast

Sleepyhead can't find data on my SD card

Post by ellen1159 » Mon Sep 07, 2015 6:25 pm

Haven't checked my stats for a while on Sleepyhead, put PR System 1 Series 60 BiPap SD card in tonight and got a message that it couldnt' find my machine data since June 29. Tried reloading the SD card in the machine, same result.

Is it likely the SD card or the machine?

_________________
Mask: Eson™ Nasal CPAP Mask with Headgear
Additional Comments: Software is Sleepyhead
Machine: Respironics Bi-level 760 pressures 9.5/13.5
Humidifier: Respironics heated humidifier
Mask: F&P Eson Nasal mask
(previous tries with ResMed Swift FX Nano nasal and Mirage Quattro Full Face...still looking for my holy grail mask)
Top
User avatar
SleepyCPAP
Posts: 333
Joined: Wed Dec 08, 2010 6:01 am

Re: Sleepyhead can't find data on my SD card

Post by SleepyCPAP » Mon Sep 07, 2015 7:00 pm

Dear Ellen1159,

To check and see if it is the SD card you could use a spare SD card and put it in the machine, waiting for the display to clear after it loads data from the machine's internal memory. Then see if SleepyHead will read data off that spare card.

Does the machine screen show averages for the past week, etc? PRS1 screens don't show much, but perhaps it would give a clue as to whether the machine is getting and calculating data.

-- SleepyCPAP

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Use OSCAR. Combine AlaxoStent with VAuto for perfect 0.0 AHI at PS 3.6 over 4cm EPAP
-- SleepyCPAP
Sleep study in 2010 (11cm CPAP). Pillows (Swift FX>TAP PAP >Bleep). PRS1 “Pro” 450/460 until recall, now Aircurve 10 VAuto. Tape mouth. Palatal Prolapse solved by AlaxoStent & VAuto EPAP 4cm, PS 3.6cm = 0.0 AHI
Top
User avatar
MarylandCPAPer
Posts: 438
Joined: Fri Jan 15, 2010 1:15 pm

Re: Sleepyhead can't find data on my SD card

Post by MarylandCPAPer » Mon Sep 07, 2015 7:04 pm

Has the "lock" on your card been in the unlocked position when in the machine? Sleepyhead software says to lock the card before putting it into the computer. If you forget to unlock it, that could cause your machine to not write data to the card.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Have also used Opus 360, Swift LT for Her, Optilife, and Breeze Nasal Pillows masks.
Started CPAP 12/18/09 Pressure 13. Changed to APAP 1/18/10, Pressure 10-16. 4/2014:Switched to AirFit P10 mask. PR System One REMstar Auto Series 550 with A-Flex for 5.5 years. 7/2015 to present: AirSense 10 AutoSet FOR HER. Range: 10-20
Top
User avatar
LSAT
Posts: 13324
Joined: Sun Nov 16, 2008 10:11 am
Location: SE Wisconsin

Re: Sleepyhead can't find data on my SD card

Post by LSAT » Mon Sep 07, 2015 8:21 pm

MarylandCPAPer wrote:Has the "lock" on your card been in the unlocked position when in the machine? Sleepyhead software says to lock the card before putting it into the computer. If you forget to unlock it, that could cause your machine to not write data to the card.
I agree...that may be the problem......I never lock my card and I have never had a problem.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion)
Additional Comments: Back up is S9 Autoset......
Top


Return to “CPAP and Sleep Apnea Message Board”