Resmed 10
Re: Resmed 10
Any chance you overfilled your humidifier? Or tipped it by accident? Does it still work?
Re: Resmed 10
when you pull out the water chamber is it wet inside the a10
_________________
Machine | Mask | |||
![]() | ![]() | |||
Additional Comments: might have to go to a FFM never could shut my mouth |
sleep ? what is this sleep you speak of ?
Re: Resmed 10
ok so the tank isn't leaking
check the hose make sure it's tight on the back
check the hose make sure it's tight on the back
_________________
Machine | Mask | |||
![]() | ![]() | |||
Additional Comments: might have to go to a FFM never could shut my mouth |
sleep ? what is this sleep you speak of ?
- grayghost4
- Posts: 1554
- Joined: Wed Aug 20, 2014 6:52 pm
- Location: Norther Illinois
- Contact:
Re: Resmed 10
I have found that when I open the cover of the water chamber to fill it ... any water or moisture that it on the cover will leak through the hinge and run down the outside of the chamber so the bottom is wet ..... if you then put it back into the blower that water will leak out of the unit and will be under the cpap ..... so dry the bottom of the water chamber before you put it back into the cpap.
If you're not part of the solution you're just scumming up the bottom of the beaker!
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual