Downloading Sleepyhead

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Downloading Sleepyhead

Post by palerider » Tue Feb 03, 2015 9:26 am

sthnreb wrote:Good morning hoseheads, er...sleepheads. I just reloaded the Sleephead software. What I found was when loading the 7Zip file, that's when to be careful. It will also load a file taplika which takes over.
where did you get 7zip?

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
Pugsy
Posts: 65127
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Downloading Sleepyhead

Post by Pugsy » Tue Feb 03, 2015 9:32 am

palerider wrote: where did you get 7zip?
I was wondering that myself. When I installed 7 zip I didn't get the malware and I didn't do an advanced install. I just did a typical install.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
OkyDoky
Posts: 2870
Joined: Mon Aug 25, 2014 5:18 pm

Re: Downloading Sleepyhead

Post by OkyDoky » Tue Feb 03, 2015 9:40 am

My initial thought was he did a search for it online. There are probably lots of sites there waiting to help themselves.
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760

Sleeprider
Posts: 1562
Joined: Tue May 06, 2008 5:57 pm
Location: Murrysville, PA

Re: Downloading Sleepyhead

Post by Sleeprider » Tue Feb 03, 2015 10:12 am

I just downloaded 7zip from the links posted on the Sleepfile.com site. All of the files in the image posted by Krelvin are from 7zip.org. However, on the right side of the page are links to files that look like they belong here, but may not be safe. Those files are hosted on links from a thread on Soundforge

Image

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Sleepyhead software. Just changed from PRS1 BiPAP Auto DS760TS

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Downloading Sleepyhead

Post by sthnreb » Tue Feb 03, 2015 11:20 am

I could have chosen the one on the right. That would be because I was not familiar with a .msi file, only .exe. I probably downloaded both. I believe I could not get the one to work properly and used the other, which had the taplika files added. I must have missed it the first time and it said load all. This last time I went to advanced settings and that is where the taplika files are loaded. You have an option in advanced to decline and uncheck them. I suppose what everyone should look for when loading any files is the advanced settings. At least see what they say. I have the software loaded and running fine now so my only mention is for anyone else who "could" have a similar problem in the future. I do know at one point it would not open and directed me to Microsoft to see what program opens it and their link leads to the one with the taplika files. Hopefully this is cleared up now for everyone.

_________________
Machine
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

jonc123
Posts: 10
Joined: Mon Oct 13, 2014 1:44 pm

Re: Downloading Sleepyhead

Post by jonc123 » Tue Feb 03, 2015 4:34 pm

http://sleepfiles.com/SH/index.html?TestingVersions

^^I tried that again and am not seeing all the links that everyone else is. I'm going to try a different computer later, have to go work now. I'll get back and let you know if that works.

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Downloading Sleepyhead

Post by sthnreb » Tue Feb 03, 2015 5:15 pm

It's probably a different site. I clicked your link on the page and did not see anything on the right then. I don't think changing computers will change anything only changing sites.

_________________
Machine
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

User avatar
OkyDoky
Posts: 2870
Joined: Mon Aug 25, 2014 5:18 pm

Re: Downloading Sleepyhead

Post by OkyDoky » Tue Feb 03, 2015 5:27 pm

jonc123 wrote:http://sleepfiles.com/SH/index.html?TestingVersions

^^I tried that again and am not seeing all the links that everyone else is. I'm going to try a different computer later, have to go work now. I'll get back and let you know if that works.
I'm not sure what site you are comparing this with. When I click on it it goes to the main Sleepyhead site for the latest version. The picture that Sleeprider posted was for the 7zip site which you can navigate to on the Sleepyhead page by looking at the bottom of the Sleepyhead downloads. There are 2 different sites the Sleepyhead site and the 7zip site which has some beta links on the right which I would ignore and go the the main download box.
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760

jonc123
Posts: 10
Joined: Mon Oct 13, 2014 1:44 pm

Re: Downloading Sleepyhead

Post by jonc123 » Thu Feb 05, 2015 6:15 am

OkyDoky wrote:
jonc123 wrote:http://sleepfiles.com/SH/index.html?TestingVersions

^^I tried that again and am not seeing all the links that everyone else is. I'm going to try a different computer later, have to go work now. I'll get back and let you know if that works.
I'm not sure what site you are comparing this with. When I click on it it goes to the main Sleepyhead site for the latest version. The picture that Sleeprider posted was for the 7zip site which you can navigate to on the Sleepyhead page by looking at the bottom of the Sleepyhead downloads. There are 2 different sites the Sleepyhead site and the 7zip site which has some beta links on the right which I would ignore and go the the main download box.
"I'm not sure what site you are comparing this with."...I 'm not comparing it to anything, just reporting what I see. It must be a problem with my computer.

When I click that link it goes to a page that says "Download list is currently unavailable ....This is just a temporary fault, please check back later."

I assume the links everyone else is seeing is in place of that. It also has a section "news" that is now empty. Used to be a blue box with notes in it.

I see no links to anything at all.

jonc123
Posts: 10
Joined: Mon Oct 13, 2014 1:44 pm

Re: Downloading Sleepyhead

Post by jonc123 » Thu Feb 05, 2015 6:31 am

I tried a different computer and that works. I am seeing the links to the different versions of sleepyhead but I do not see the 7zip link which I have anyway now.

Is the 64 bit the best version for me to download? Or is the 32 bit more stable? I am using Windows 7/64 on both my laptops.

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Downloading Sleepyhead

Post by sthnreb » Thu Feb 05, 2015 7:37 am

If I were running a 64 bit windows, I would get the 64 bit version. While it is sometimes possible to run a 32 bit version program on a 64 bit computer, it would be best to get the 64 bit when available. Conclusion 64 bit is best for a 64 bit system.

_________________
Machine
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

jonc123
Posts: 10
Joined: Mon Oct 13, 2014 1:44 pm

Re: Downloading Sleepyhead

Post by jonc123 » Thu Feb 05, 2015 3:27 pm

Thanks!

Sleeprider
Posts: 1562
Joined: Tue May 06, 2008 5:57 pm
Location: Murrysville, PA

Re: Downloading Sleepyhead

Post by Sleeprider » Thu Feb 05, 2015 4:21 pm

The 64 bit version is missing Microsoft Visual Basic files and will generate an error on startup. The 32 bit version is easier for that reason. You can install those files, by getting Visual C++ Redistributable Packages for Visual Studio 2013

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Sleepyhead software. Just changed from PRS1 BiPAP Auto DS760TS

User avatar
archangle
Posts: 9293
Joined: Sun Mar 27, 2011 11:55 am

Re: Downloading Sleepyhead

Post by archangle » Fri Feb 06, 2015 12:05 pm

jonc123 wrote:When I click that link it goes to a page that says "Download list is currently unavailable ....This is just a temporary fault, please check back later."
Are you using NoScript or something similar in your browser? Disabling javascript will get you that error message.

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Also SleepyHead, PRS1 Auto, Respironics Auto M series, Legacy Auto, and Legacy Plus
Last edited by archangle on Fri Feb 06, 2015 3:53 pm, edited 1 time in total.
Please enter your equipment in your profile so we can help you.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.

Useful Links.

User avatar
OkyDoky
Posts: 2870
Joined: Mon Aug 25, 2014 5:18 pm

Re: Downloading Sleepyhead

Post by OkyDoky » Fri Feb 06, 2015 12:10 pm

archangle wrote:
jonc123 wrote:
OkyDoky wrote:When I click that link it goes to a page that says "Download list is currently unavailable ....This is just a temporary fault, please check back later."
Are you using NoScript or something similar in your browser? Disabling javascript will get you that error message.

Not sure how that became my quote when it was actually jonc123's quote. It was never my problem or words. Interesting how words can be changed around.
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760