Respironics bipap st for sale 26 machine hours.
-
- Posts: 20
- Joined: Thu Apr 03, 2014 2:34 pm
Respironics bipap st for sale 26 machine hours.
Clean, non smoking home, lightly used respironics bipap st for sale. The machine has 26 hours. No filters or smart card included. Machine and bag only. Shipping included in the price. $450.00 obo. Pictures can be seen at the link.
http://s1168.photobucket.com/user/meatt ... bipap%20st
http://s1168.photobucket.com/user/meatt ... bipap%20st
Re: Respironics bipap st for sale 26 machine hours.
Can we get a bit more info:
Can this machine take a memory card?
Will it submit its data to be analyzed by SLeepyHead et al?
Does it have a humidifier?
Thank you!
Can this machine take a memory card?
Will it submit its data to be analyzed by SLeepyHead et al?
Does it have a humidifier?
Thank you!
-
- Posts: 326
- Joined: Wed Dec 26, 2007 10:57 am
Re: Respironics bipap st for sale 26 machine hours.
Judging by the photo, it looks like it might be the (discontinued) REMstar BiPAP ST Gray Model with Smart Card:
https://www.cpap.com/productpage/Respir ... -Gray.html
It says compatible with Encore Pro (if this is that model) but no idea about Sleepyhead.
https://www.cpap.com/productpage/Respir ... -Gray.html
It says compatible with Encore Pro (if this is that model) but no idea about Sleepyhead.
_________________
Mask: Mirage™ FX Nasal CPAP Mask with Headgear |
Additional Comments: UARS; pressure 15/19 |
Re: Respironics bipap st for sale 26 machine hours.
never mind.. not helpful wrong machine.. Thanks Den!
_________________
Machine: DreamStation BiPAP® Auto Machine |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: Settings are IPap 23 EPap 19 |
Last edited by Bill44133 on Tue Jun 10, 2014 6:33 pm, edited 2 times in total.
Re: Respironics bipap st for sale 26 machine hours.
It will NOT work with SleepyHead. SleepyHead only works with SD card and not with smart cards.
I would have to check on using Encore Pro as they are phasing out support for those older machines with Pro. Not sure if Encore Basic will work either. This is one model older than the normal Legacy series models and looks a lot like it externally except the color. I have no idea how it measures up internally.
The DT3500 Infineer smart card reader would also be needed. Nothing else would work. Still available though.
Plus I don't see any place to insert a smart card unless that end plate is covering it.
Despite the low hours (even if those are blower hours and not therapy hours) this model is a real dinosaur.
Need manufacture data off the sticker if it has one. I suspect probably around 10 years old.
I would have to check on using Encore Pro as they are phasing out support for those older machines with Pro. Not sure if Encore Basic will work either. This is one model older than the normal Legacy series models and looks a lot like it externally except the color. I have no idea how it measures up internally.
The DT3500 Infineer smart card reader would also be needed. Nothing else would work. Still available though.
Plus I don't see any place to insert a smart card unless that end plate is covering it.
Despite the low hours (even if those are blower hours and not therapy hours) this model is a real dinosaur.
Need manufacture data off the sticker if it has one. I suspect probably around 10 years old.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
Last edited by Pugsy on Tue Jun 10, 2014 5:40 pm, edited 2 times in total.
I may have to RISE but I refuse to SHINE.
Re: Respironics bipap st for sale 26 machine hours.
I'd put money on the probability that those "hours" he's quoting are actually "User" hours (which can be reset) and not the actual "Blower" hours......which can't be reset. The screen for the "Blower hours" should actually show "Blower hours" and not just "Hours" or "Hrs." as in his picture. And, when booting the machine, the blower hours only flash for a second or two (just after the firmware number)......probably not long enough to get a decent picture of them.notacpapuser wrote:Clean, non smoking home, lightly used respironics bipap st for sale. The machine has 26 hours. No filters or smart card included. Machine and bag only. Shipping included in the price. $450.00 obo. Pictures can be seen at the link.
The price is ridiculous for that old of a machine. And, I'd venture to guess the actual hours on that machine are in the many thousands.
The old adage of "A fool and his money are soon parted." comes to mind
And, Bill........that's the wrong machine link for this machine. This one is probably in the 9 - 11 year old category.
Den
.
-
- Posts: 20
- Joined: Thu Apr 03, 2014 2:34 pm
Re: Respironics bipap st for sale 26 machine hours.
There is no humidifier. I'm sorry I know nothing about sleepyhead. I will post the model number shortly. If anyone knows how to check the actual hours please let me know. I do not know this machine well.
Re: Respironics bipap st for sale 26 machine hours.
There should also be an "External AC Power Supply" module. The old Legacy Bi-Pap machines run on 24V.notacpapuser wrote:There is no humidifier. I'm sorry I know nothing about sleepyhead. I will post the model number shortly. If anyone knows how to check the actual hours please let me know. I do not know this machine well.
When plugged into the power source, there should be several things that appear in the LCD......the Firmware version, the Blower hours and then the User hours.
Den
.
Re: Respironics bipap st for sale 26 machine hours.
Well.......some did and some didn't. Apparently you had power to it when you took the pictures, so whatever cord works with that one is the appropriate cord.Wulfman... wrote:There should also be an "External AC Power Supply" module. The old Legacy Bi-Pap machines run on 24V.notacpapuser wrote:There is no humidifier. I'm sorry I know nothing about sleepyhead. I will post the model number shortly. If anyone knows how to check the actual hours please let me know. I do not know this machine well.
When plugged into the power source, there should be several things that appear in the LCD......the Firmware version, the Blower hours and then the User hours.
Den
.
Den
.