Nasal Mask help

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
boert
Posts: 5
Joined: Fri May 16, 2014 7:30 am

Nasal Mask help

Post by boert » Fri May 16, 2014 7:37 am

I am new to the forum so here's a quick summary. Just started using my CPAP machine and it came with a full face mask. I hate it. I like to read (with my glasses on) as I am preparing to slumber and the full mask, as you probably know, doesn't allow me to use glasses or view my kindle without looking out the side with one eye.

So, I am asking for help with a recommendation of a nasal mask that will work for glasses wearers and book lovers alike.

Boert

User avatar
Pad A Cheek
Posts: 836
Joined: Sat Oct 22, 2005 3:40 pm
Location: Virginia, In the shadow of the Blue Ridge Mountains
Contact:

Re: Nasal Mask help

Post by Pad A Cheek » Fri May 16, 2014 7:43 am

Hey Boert,

You could try the Swift FX Nano, or the AirFit N10. Respironics has a mask out called the Wisp that also is a nasal mask that you can use with glasses.
I am sure there are several others I have not thought of, but those are a few that come to mind.

I wish you the best of luck with your search.

Karen

_________________
Machine: DreamStation Auto CPAP Machine
Additional Comments: This CPAP stuff at night makes the days so much more productive
And I think to myself...... What a Wonderful World

boert
Posts: 5
Joined: Fri May 16, 2014 7:30 am

Re: Nasal Mask help

Post by boert » Fri May 16, 2014 7:51 am

Thanks Karen,

My insurance won't cover another mask. Where can I get one without the prescription..

Bob

User avatar
Pugsy
Posts: 65411
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Nasal Mask help

Post by Pugsy » Fri May 16, 2014 7:59 am

While the entire mask package itself requires a RX...the replacement parts do not require a RX so once you know which parts you need you can build your own mask without a RX.
Cpap.com is a good source.
EBay is also a good source if they happen to have sellers with the parts needed to build your own mask.

Do you want a nasal cushion mask or a nasal pillow mask? Or do you know?

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
Pad A Cheek
Posts: 836
Joined: Sat Oct 22, 2005 3:40 pm
Location: Virginia, In the shadow of the Blue Ridge Mountains
Contact:

Re: Nasal Mask help

Post by Pad A Cheek » Fri May 16, 2014 8:00 am

How long have you been using CPAP? The first month you should be able to change masks out until you find the one that you like the best. It is a manufacturer's policy. Your DME may not have shared that with you.

You need a prescription to buy a whole mask, but there are other ways to obtain masks. Folks on this forum are very kind and generous.

Karen

_________________
Machine: DreamStation Auto CPAP Machine
Additional Comments: This CPAP stuff at night makes the days so much more productive
And I think to myself...... What a Wonderful World

bavinck
Posts: 286
Joined: Fri Dec 06, 2013 8:26 am
Location: Alberta, Canada

Re: Nasal Mask help

Post by bavinck » Fri May 16, 2014 8:00 am

Your doc needs to supply you a prescription, then you can buy a mask anywhere (including online) if you are paying out of pocket.
Auto 9-15cm
SleepyHead v0.9.3

boert
Posts: 5
Joined: Fri May 16, 2014 7:30 am

Re: Nasal Mask help

Post by boert » Fri May 16, 2014 8:37 am

Pugsy wrote:While the entire mask package itself requires a RX...the replacement parts do not require a RX so once you know which parts you need you can build your own mask without a RX.
Cpap.com is a good source.
EBay is also a good source if they happen to have sellers with the parts needed to build your own mask.

Do you want a nasal cushion mask or a nasal pillow mask? Or do you know?
I see what you mean...might cast a few bucks more but still get the same components...

I want the suction nasal mask

Thanks Pugsy

User avatar
Pugsy
Posts: 65411
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Nasal Mask help

Post by Pugsy » Fri May 16, 2014 9:01 am

boert wrote: I want the suction nasal mask
I assume you mean a nasal cushion that covers the nose.

Check out EBay for the Swift FX Nano nasal cushion mask. I think it is popular enough that you can build your own mask with it.
There's a sizing guide available for printing at cpap.com page for the Nano.

Sometimes buying the parts does cost a little more...but sometimes less if you shop smart on EBay. Sometimes 50% savings.
All depends on what you want and the seller's pricing.

The Swift FX Nano would be a good one to try because the headgear and short hose assembly can also be used with the Swift FX nasal pillows should you ever want to try those....then all you have to get is a nasal pillow and you might check with me first as I might have one you can have for the cost of postage.

The Nano is a good mask too.
You will need the short hose assembly, the headgear and of course the nasal cushion that goes over the nose.
So 3 pieces.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

boert
Posts: 5
Joined: Fri May 16, 2014 7:30 am

Re: Nasal Mask help

Post by boert » Fri May 16, 2014 9:10 am

Pugsy wrote:
boert wrote: I want the suction nasal mask
I assume you mean a nasal cushion that covers the nose.

Check out EBay for the Swift FX Nano nasal cushion mask. I think it is popular enough that you can build your own mask with it.
There's a sizing guide available for printing at cpap.com page for the Nano.

Sometimes buying the parts does cost a little more...but sometimes less if you shop smart on EBay. Sometimes 50% savings.
All depends on what you want and the seller's pricing.

The Swift FX Nano would be a good one to try because the headgear and short hose assembly can also be used with the Swift FX nasal pillows should you ever want to try those....then all you have to get is a nasal pillow and you might check with me first as I might have one you can have for the cost of postage.

The Nano is a good mask too.
You will need the short hose assembly, the headgear and of course the nasal cushion that goes over the nose.
So 3 pieces.
Thanks again,

From my research I am leaning toward the nano...good to know it will fit for the pillows as well...