Corrupt sleepyhead data

[newsnore]

Would this explain why I am seeing double usage hours also in the Session Times graph too

Yep. Now you could just go back to each day and turn off the double session. On the left side below all the numbers scroll down to the little green boxes for each session...Click on one of the (we never know which one) to turn it to red. If the graphs on the right disappear...you have turned off the wrong one. So click on it to turn it to green and go turn off the other one.
Only problem with this...sometimes it doesn't hold...you go back to Overview and the darn thing has reverted back.
I don't know why sometimes it holds and sometimes it doesn't.

I installed the Patch file just to figure out the steps for it and stumbled onto the fact that it eliminated the double session bug.
Mark was aware of it last year and fixed it in a build but it was not released as an update univerally.
When Rich built the code to make the 60 series compatible he started with the new build that Mark had the double session bug fix in...so the bug fix is in the Patch file.

The double session but is a byproduct of the time change and sometimes it doubles the session and sometimes it doesn't. We don't know why it doesn't do it all the time.

So you could try turning off each session manually and see if it holds. If not you can install the Patch file. I don't know how retroactive it is though. When I did it I had just manually turned off the double sessions for about the upteenth time.
It was a pleasant surprise to find out the Patch fixed my double session issues.

Thank you once again Pugsy - I am going to give the patch a try - I thought it must have been something I had done wrong so I didn't know why at a certain date it just righted itself again? Thanks again.

[Mask2fit]

This all all very helpful to me as I have been getting weird usage times and inded now find that it is worse during daylight saving. Since the seventh of April (normal time here) it has been OK so far. However something really weird is still in the data. For instance in July last year (no daylight saving here then) I see that there were mutltiple duplicates. Obviously that day I had two mask sesions but each of them were tripled

SessionID On Date Start End
CPAP Sessions
1341312420ResMed CPAP 4h, 56m, 0s 3/07/2012 22:47 03:43
1341316020ResMed CPAP 4h, 56m, 0s 3/07/2012 23:47 04:43
1341316025ResMed CPAP 4h, 56m, 13s 3/07/2012 23:47 04:43
1341330720ResMed CPAP 1h, 11m, 0s 4/07/2012 03:52 05:03
1341334320ResMed CPAP 1h, 11m, 0s 4/07/2012 04:52 06:03
1341334339ResMed CPAP 1h, 10m, 22s 4/07/2012 04:52 06:03

This triplication happened on the majority of days that winter.

I dont change the time on my CPAP machine when the clocks change. I leave it running on the same time all the time

[Mask2fit]

Does anyone have any idea about the cause of the above triplication?

[Pugsy]

It's a known bug in SleepyHead and the S9 and changes in the clock cause it sometimes and we don't know why not all the time..

You can manually turn off each duplicate session ..just scroll down below those sessions and click on the box to change the green box to red. If you turn off the wrong one the graphs on the right disappear so just turn that one back on and turn the other one off.

It appears if you want to install the Patch file normally for the 60 series PR S1 machines it fixes that little bug.