Yet another newbie looking for support.

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
wolewyck
Posts: 150
Joined: Wed Sep 29, 2010 3:17 pm

Re: Yet another newbie looking for support.

Post by wolewyck » Fri Dec 28, 2012 10:06 pm

5 is the threshold that doctors use to define disease... below 5 is considered normal, and above is mild/moderate/severe apnea, depending on how high you get. Some people seem to feel fine anywhere below 5; others seem to feel noticeably better if they can get it even lower. Also, keep in mind when asking if 5 is ok, that it can take your body some time to adjust to treatment... in my case, my AHI dropped some during the first month or so of treatment. In other words, where you start is not necessarily where you end up... For your first night, 5 sounds to me like a great start. As a non-medical opinion!

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: ResMed S9 VPAP Adapt SV

JohnO
Posts: 573
Joined: Sun Jun 03, 2012 8:52 am
Location: Twin Cities, Minnesota, USA

Re: Yet another newbie looking for support.

Post by JohnO » Fri Dec 28, 2012 10:09 pm

Red Sunset wrote:Thanks black. So what should I be aiming for? Appart from zero obviously.
My AHI has been less than 1 every night since my 5th night on Auto-CPAP back in August. I've read here that 5 is the high-end of acceptable. If you do change your pressure, it is recommended not to change it more than 1 cmH2O at a time, and try that new pressure for 5 days before re-evaluating.

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Zeo Bedside, CMS-50E Pulse Oximeter

Red Sunset
Posts: 16
Joined: Thu Dec 20, 2012 3:15 pm

Re: Yet another newbie looking for support.

Post by Red Sunset » Fri Dec 28, 2012 10:24 pm

I thought so too Wol! Much better than the 38 I'd been averaging. But worked out how to put the auto minimum setting to 7, so we' ll see if that helps.

EDIT: Just read your post John. Maybe I'll drop it back to 5 for the next few nights, rather than going straight to 7. What are the risks with higher pressures?

JohnO
Posts: 573
Joined: Sun Jun 03, 2012 8:52 am
Location: Twin Cities, Minnesota, USA

Re: Yet another newbie looking for support.

Post by JohnO » Fri Dec 28, 2012 11:39 pm

Red Sunset wrote:I thought so too Wol! Much better than the 38 I'd been averaging. But worked out how to put the auto minimum setting to 7, so we' ll see if that helps.

EDIT: Just read your post John. Maybe I'll drop it back to 5 for the next few nights, rather than going straight to 7. What are the risks with higher pressures?
Given the very low minimum pressure you have now, I think you could move to 7 safely. I think the main reason they suggest moving only .5 or 1 cm at a time is more for the fine tuning. Since you are just starting out, I think you can take a bigger swing at the correct pressure.

In the bigger picture, higher pressures tend to be more uncomfortable, and more likely to cause mask leaks, so therefore, the lowest effective pressure would be your goal.

John

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Zeo Bedside, CMS-50E Pulse Oximeter

Red Sunset
Posts: 16
Joined: Thu Dec 20, 2012 3:15 pm

Re: Yet another newbie looking for support.

Post by Red Sunset » Sat Dec 29, 2012 12:25 am

Thanks John. To be honest, I've felt really good today! Have cleaned up a bit, gone shopping, mowed the lawn. Usually on the weekends I do the shopping and then fall asleep on the couch for three hours. So I can already see the benefits of cpap. My wife is 39 weeks pregnant with our first child, so what little sleep I may be getting over yhe coming weeks I want it to be quality!

User avatar
zoocrewphoto
Posts: 3732
Joined: Mon Apr 30, 2012 10:34 pm
Location: Seatac, WA

Re: Yet another newbie looking for support.

Post by zoocrewphoto » Sat Dec 29, 2012 1:56 am

Red Sunset wrote:Thanks John. To be honest, I've felt really good today! Have cleaned up a bit, gone shopping, mowed the lawn. Usually on the weekends I do the shopping and then fall asleep on the couch for three hours. So I can already see the benefits of cpap. My wife is 39 weeks pregnant with our first child, so what little sleep I may be getting over yhe coming weeks I want it to be quality!

Congratulations! And even more congratulations!

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resmed S9 autoset pressure range 11-17
Who would have thought it would be this challenging to sleep and breathe at the same time?

JohnO
Posts: 573
Joined: Sun Jun 03, 2012 8:52 am
Location: Twin Cities, Minnesota, USA

Re: Yet another newbie looking for support.

Post by JohnO » Sat Dec 29, 2012 8:33 am

Red Sunset wrote:Thanks John. To be honest, I've felt really good today! Have cleaned up a bit, gone shopping, mowed the lawn. Usually on the weekends I do the shopping and then fall asleep on the couch for three hours. So I can already see the benefits of cpap. My wife is 39 weeks pregnant with our first child, so what little sleep I may be getting over yhe coming weeks I want it to be quality!

Great news! Let's hope last night went well too. As you said, with a little one on the way, you will need all the good quality sleep you can get! Congratulations.

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Zeo Bedside, CMS-50E Pulse Oximeter

User avatar
BlackSpinner
Posts: 9742
Joined: Sat Apr 25, 2009 5:44 pm
Location: Edmonton Alberta
Contact:

Re: Yet another newbie looking for support.

Post by BlackSpinner » Sat Dec 29, 2012 9:42 am

Red Sunset wrote:Thanks John. To be honest, I've felt really good today! Have cleaned up a bit, gone shopping, mowed the lawn. Usually on the weekends I do the shopping and then fall asleep on the couch for three hours. So I can already see the benefits of cpap. My wife is 39 weeks pregnant with our first child, so what little sleep I may be getting over yhe coming weeks I want it to be quality!
Congratulations on all fronts! Yes every bit of sleep for the next few months are going to need to be quality sleep LOL.

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Additional Comments: Quatro mask for colds & flus S8 elite for back up
71. The lame can ride on horseback, the one-handed drive cattle. The deaf, fight and be useful. To be blind is better than to be burnt on the pyre. No one gets good from a corpse. The Havamal

gomer
Posts: 137
Joined: Wed Oct 31, 2012 7:44 am

Re: Yet another newbie looking for support.

Post by gomer » Sat Dec 29, 2012 11:05 am

I am also a newbie to APAP here. My doc Rx'd APAP and so far its going far better than I expected.

My titration study showed I needed one pressure for side sleeping and another for sleeping on my back. The auto handles my needs regardless of any changes side/back sleep during the nite. I have noticed my pressure needs vary from night to night.

Congrats on the little one on the way. Our youngest grandson is just over a month old, I love little babies, they are so cute & delicate. They also can't out run me or say no yet...ha ha.

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Additional Comments: APAP Rx 10-14 actual use range 10+ to 13+

User avatar
chunkyfrog
Posts: 34545
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: Yet another newbie looking for support.

Post by chunkyfrog » Sat Dec 29, 2012 11:16 am

Congratulations on the new baby.
A child's first year is a time full of "firsts", try not to miss any.
My mind is forever etched with the expression on my son's face when he had his first bite of solid food.
Surprise and delight enough to fill your heart and empty your eyes. The thought still moves me.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

Red Sunset
Posts: 16
Joined: Thu Dec 20, 2012 3:15 pm

Re: Yet another newbie looking for support.

Post by Red Sunset » Sat Dec 29, 2012 5:16 pm

Well, I checked my data again this morning and still have an AHI of 5.75.
I increased the 'auto min' to 7 last night. Any other suggestions to get me below 5? I think the mask is leaking a bit too, but it must leak while I'm asleep because it feels pretty secure when I put it on. It's a mirage quatro.

JohnO
Posts: 573
Joined: Sun Jun 03, 2012 8:52 am
Location: Twin Cities, Minnesota, USA

Re: Yet another newbie looking for support.

Post by JohnO » Sat Dec 29, 2012 9:58 pm

Red Sunset wrote:Any other suggestions to get me below 5? I think the mask is leaking a bit too, but it must leak while I'm asleep because it feels pretty secure when I put it on. It's a mirage quatro.
I think we need someone more literate with Sleepyhead to review your leak rate data.

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Zeo Bedside, CMS-50E Pulse Oximeter

ems
Posts: 2757
Joined: Fri Jul 29, 2011 12:46 am

Re: Yet another newbie looking for support.

Post by ems » Sat Dec 29, 2012 11:17 pm

JohnO wrote:
Red Sunset wrote:Any other suggestions to get me below 5? I think the mask is leaking a bit too, but it must leak while I'm asleep because it feels pretty secure when I put it on. It's a mirage quatro.
I think we need someone more literate with Sleepyhead to review your leak rate data.
Calling Pugsy! Actually, she is away this week. Back early next week, I believe.
If only the folks with sawdust for brains were as sweet and obliging and innocent as The Scarecrow! ~a friend~